Replacing the Display Bezel
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in
Before You
2. Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the display panel.
3. Replace the six M2.5 x 4.2-mm shoulder screws around the display bezel.
4. Replace the four rubber display bumpers and two mylar screw covers around the display bezel.
5. Replace the display assembly (see
6. Replace the keyboard (see
7. Replace the hinge cover (see
Display Panel
Removing the Display Panel
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in
Before You
2. Remove the hinge cover (see
3. Remove the keyboard (see
4. Remove the display assembly (see
5. Remove the display bezel (see
6. Remove the eight M2 x 3-mm screws (four on each side of the display panel) from around the display panel.
7. Remove the two M2.5 x 5-mm screws from the bottom of the display panel.
8. Lift the top of the display panel, then rotate the camera/microphone connector latch upward to release the camera/microphone cable.
9. Lift the display panel out of the display cover.
1 camera/microphone connector latch 2 camera/microphone cable connector
3 display panel
5 M2 x 3-mm screws (8)
Begin.
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Begin.
Removing the Hinge
Cover).
Replacing the
Keyboard).
Removing the Display
Assembly).
Removing the Display
Bezel).
4 M2.5 x 5-mm screws (2)
6 display cover