Wireless Sniffer Board - Dell Vostro 1700 Service Manual

Back to Contents Page
Computer Base and Components
Dell™ Vostro™ 1700 and Inspiron™ 1720/1721 Service Manual
Wireless Sniffer Board
Audio Connector Board
Consumer Infrared (CIR) Board
USB Connector Board
Modem Connector
ExpressCard Cage
Computer Base
Wireless Sniffer Board
Removing the Wireless Sniffer Board
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in Before You
2. Remove the optical drive (see
3. Remove the hard drive (see
4. Remove the hinge cover (see
5. Remove the keyboard (see
6. Remove the display assembly (see
7. Remove the internal card with Bluetooth wireless technology, if installed (see
8. Remove the palm rest (see
9. Remove the M2.5 x 5-mm screw that secures the wireless sniffer board to the base of the computer.
10. Lift the wireless sniffer board out of the computer.
NOTICE: Do not disconnect the sniffer cable from the system board.
11. Disconnect the sniffer cable from the wireless sniffer board.
Begin.
Removing the Optical Drive).
Removing a Hard Drive).
Removing the Hinge Cover).
Removing the Keyboard).
Removing the Display Assembly).
Removing the Palm Rest).
Removing the Bluetooth Card).