Installing The Low-Voltage Differential Signaling (Lvds) Camera Cable; Removing The Rgb Low-Voltage Differential Signaling (Lvds) Cable - Dell Precision M4600 Owner's Manual

Installing The Low-Voltage Differential Signaling (LVDS) Camera Cable

1. Secure the low-voltage differential signaling (LVDS) cable to its routing
channel.
2. Replace the adhesives to secure the LVDS and camera cable in place.
3. Connect the LVDS and camera cable to the camera.
display hinge, hinge cap, hinge tower .
4. Install the
standard display panel or the touchscreen display panel .
5. Install the
standard display bezel or the touchscreen display bezel .
6. Install the
display assembly .
7. Install the
palm rest .
8. Install the
hard drive .
9. Install the
optical drive .
10. Install the
keyboard .
11. Install the
keyboard trim .
12. Install the
base cover .
13. Install the
battery .
14. Install the
15. Follow the procedures in

Removing The RGB Low-voltage Differential Signaling (LVDS) Cable

1. Follow the procedures in
battery .
2. Remove the
base cover .
3. Remove the
keyboard trim .
4. Remove the
keyboard .
5. Remove the
optical drive .
6. Remove the
hard drive .
7. Remove the
112
palm rest .
8. Remove the
display assembly .
9. Remove the
After Working Inside Your Computer .
Before Working On Your Computer .