Replacing The Battery Latch Assembly - Dell Latitude 131L Service Manual

1 hook
11. Remove the plastic battery-latch assembly by twisting the assembly slightly and lifting it out of the channel and away from the computer base.
1 battery latch assembly
Replacing the Battery Latch Assembly
1. Insert the latch assembly into the channel on the computer base, and press it into place.
2. Using a small screwdriver, hook the spring over the hook on the computer base.
3. Place the battery latch release under the computer base, line it up with the hole in the base, and then replace the screw in the assembly.
Ensure that the newly installed latch moves smoothly and freely when pushed and released.
4. Replace the system board (see
5. Replace the processor thermal-cooling assembly (see
6. Replace the palm rest (see
7. Replace the display assembly (see
8. Replace the keyboard (see
9. Replace the hinge cover (see
10. Replace the hard drive (see
Back to Contents Page
2 spring
Replacing the System Board).
Replacing the Processor Thermal-Cooling
Replacing the Palm Rest).
Replacing the Display Assembly).
Replacing the Keyboard).
Replacing the Hinge Cover).
Replacing the Hard Drive).
Assembly).