Replacing The System Board - Dell Latitude 131L Service Manual

16. Remove the remaining two M2.5 x 5-mm screws from the system board.
1 M2.5 x 5-mm screws (2)
17. Pull out slightly on the back right side of the computer to release the connectors on the system board from the base.
18. Lift the front of the system board and slowly ease the connectors out of the computer base and remove the system board.
Replacing the System Board
1. Carefully place the system board into the computer base.
2. Replace the two M2.5 x 5-mm screws in the system board.
3. Replace the two hex-nut video screws in the back of the computer.
4. Replace the ExpressCard/hard-drive bay assembly (see
5. Replace the processor (see
6. Replace the processor thermal-cooling assembly (see
7. Replace the fan (see Replacing a
8. Replace the palm rest (see
9. Replace the display assembly (see
10. Replace the Mini-Card (see
11. Replace the keyboard (see
12. Replace the hinge cover (see
Replacing the ExpressCard/Hard-Drive Bay
Replacing the Processor Module).
Replacing the Processor Thermal-Cooling
Fan).
Replacing the Palm Rest).
Replacing the Display Assembly).
Replacing a Mini-Card).
Replacing the Keyboard).
Replacing the Hinge Cover).
Assembly).
Assembly).