Zif Connectors; Figure 4. Disconnecting An Interface Cable - Dell Latitude LS Service Manual

ZIF Connectors

Some of the computer's interface connectors are zero insertion force (ZIF)
connectors. These connectors are not removable, but they must be released
to disconnect a cable from them (see Figure 4).

Figure 4. Disconnecting an Interface Cable

NOTICE: The ZIF connectors are fragile. To avoid damage, do not
apply too much pressure to the movable part of the connector.
To disconnect an interface cable from a ZIF connector, perform the following
steps:
1. Insert a small flat-blade screwdriver under the movable part of the
2. Pull gently upward on the movable part of the connector until it releases
3. Grasp the interface cable and pull it out of the connector.
To reconnect an interface cable to a ZIF connector, perform the following
steps:
1. Use a small flat-blade screwdriver to open the movable part of the ZIF
2. Orient the end of the interface cable with the ZIF connector, and insert the
3. While holding the cable in place, close the ZIF connector.
support.dell.com
connector.
the interface cable.
connector.
end of the cable into the connector.
To ensure a firm connection, make sure the ZIF connector is completely
closed.
Dell Latitude LS Portable Computers Service Manual
movable part of
connector
(do not remove)
5