Dell Latitude C840 Service Manual page 31

Display: Dell Latitude C840 Service Manual
1 M2.5 x 6-mm screw
2 strain relief
3 display flex cable
4 pull loop
2. Remove the M2.5 x 6-mm flex-cable strain relief screw, and then use the pull loop to remove
the display flex cable from the graphics card.
NOTICE: When reconnecting the flex cable, press down on both ends of the connector, not in
the middle. Pressing the middle of the connector can damage fragile components.
3. Open the display and, from the back of the computer, remove the two M2.5 x 6-mm screws
labeled "circle D" that secure the display assembly to the bottom case.
4. With the display in an upright position, lift the display assembly from the bottom case.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/C840/C840_SERVICE_MANUAL/display.htm (5 of 10)6/21/2004 1:36:15 AM