Replacing The Led Board; Fan Assembly - Dell Inspiron 8100 Service Manual

Removing and Replacing Parts : Dell Inspiron 8100
1. Follow the instructions in
2. Remove the hinge
3. Remove the two M2 x 4-mm screws.
4. Pull the LED board away from its connector.

Replacing the LED Board

1. Align the two screw holes with the two mounting holes on the bottom case assembly, and press
the board into its connector.
2. Replace the two M2 x 4-mm screws.

Fan Assembly

NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any
installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface on the computer.
Removing the Fan Assembly
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/8100/8100_SERVICE_MAN/remove.htm (48 of 52)6/21/2004 1:09:07 AM
"Preparing to Work Inside the
cover.
Computer."