Clarion VXZ766 Owner's Manual page 47

Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
If the 6 stations with good reception are not
available, stations previously stored in memory
remain. Only stations with strong reception are
stored into memory.
1. Press the [BND] button and select the
desired TV band (TV1 or TV2).
2. Press and hold the [PS/AS] button for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
1. Press the [PS/AS] button.
2. When the desired station is found, press the
[PS/AS] button again to remain tuned to that
station.
Note:
• Do not press and hold the [PS/AS] button for 2
seconds or longer. Doing so will trigger the auto
store function and start storing stations into
memory.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [ ] / [
AREA".
3. Press the [ ] button.
4. Turn the [ROTARY] knob to select the
reception area.
5. Press the [ ] button.
6. Press the [ADJ] button to return to the
previous mode.
• The above operations are required when a TV
tuner other than TTX7501z is connected.
] lever to select "TV
OPERATIONS OF ACCESSORIES
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
• The factory default setting is "ON".
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [ ] / [
DIVER".
3. Turn the [ROTARY] knob to select "ON" or
"OFF".
ON:
Sets the diver setting to ON.
OFF:
Sets the diver setting to OFF.
4. Press the [ADJ] button to return to the
previous mode.
] lever to select "TV
47
VXZ766