Clarion VXZ766 Owner's Manual page 17

When the power is turned off
1. Each time you press the [DISP] button, the
display switches in the following order:
Clock display ➜ Display off ➜ Clock
display...
Setting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
• This function cannot be adjusted when as follows:
"Pro Logic" is set to "ON", the speaker system is
set to "5.1ch", DVD/DTS-CD is being played.
• The factory default setting is "OFF".
1. Press and hold the [A-M] button for 1 second
or longer to turn on.
2. Press and hold the [A-M] button for 1 second
or longer to turn off.
Setting the Z-Enhancer Plus
This unit is provided with 4 types of sound tone
effects stored in memory. Select the one you
prefer.
• This function cannot be adjusted when as follows:
"Pro Logic" is set to "ON", the speaker system is
set to "5.1ch", DVD/DTS-CD is being played.
• The factory default setting is "Z+ OFF".
1. Each time you press the [Z+] button, the tone
effect changes in the following order:
"Z+ OFF" ➜ "B-BOOST" ➜ "IMPACT" ➜
"EXCITE" ➜ "CUSTOM" ➜ "Z+ OFF"...
• B-BOOST : bass emphasized
• IMPACT : bass and treble emphasized
• EXCITE : bass and treble emphasized, mid
de-emphasized
• CUSTOM : user custom
• Z+ OFF : no sound effect
Adjusting the center speaker
• This function cannot be adjusted when as follows:
"Pro Logic" is set to "ON", the speaker system is
set to "5.1ch", DVD/DTS-CD is being played.
• This function cannot be adjusted when the center
speaker output is set to "OFF" or the speaker
system is set to "2ch". For details on how to set
the center speaker, refer to the subsection
"Turning on/off speakers" (P. 36) in the section
"Changing Initial Settings such as Menu
Language, etc.".
• The factory default setting is "C-VOL 0".
1. Press the [A-M] button and select
2. Turn the [ROTARY] knob to select from -4 to
+8 or OFF.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the subwoofer
• This function cannot be adjusted when as follows:
"Pro Logic" is set to "ON", the speaker system is
set to "5.1ch", DVD/DTS-CD is being played.
• This function cannot be adjusted when the
subwoofer output is set to "OFF". For details on
how to set the subwoofer, refer to the subsection
"Turning on/off speakers" (P. 36) in the section
"Changing Initial Settings such as Menu
Language, etc.".
• The factory default setting is "SW-VOL 0".
1. Press the [A-M] button and select
0".
2. Turn the [ROTARY] knob to select from -6 to
+6 or OFF.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the Z-Enhancer Plus
• This function cannot be adjusted when as follows:
"Pro Logic" is set to "ON", the speaker system is
set to "5.1ch", DVD/DTS-CD is being played.
• Press and hold the [Z+] button for 1 second or
longer, then the setting parameter of bass/treble
will be initialized with a display "Z+FLAT".
1. Press the [Z+] button and select the
Z-Enhancer Plus mode to adjust.
2. Press the [A-M] button and select "B-BST 0"
or "IMPACT 0" or "EXCITE 0".
3. Turn the [ROTARY] knob to select from -3 to
+3.
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
" C-VOL 0".
OPERATIONS
SW-VOL
"
17
VXZ766