Advertisement
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Operating system
Setup/Config
Web user interface
Management
SNMP version
Web firmware upgrade
Dynamic Host Configuration
Protocol (DHCP)
Operating Modes
Wireless client
Wireless
Spec/modulation
Channels
Internal antennas
External antennas
Transmit power
Antenna gain in dBi
Receiver sensitivity
Security
WEP/WPA/WPA2
Access control
802.1X
Quality of Service
QoS
General
● 16 VLAN groups
● 256 MAC address entries across wireless bridge
● 1024 MAC address entries in the switch
Environmental
Dimensions
W x H x D
Weight
Power
Certification
Operating temperature
Storage temperature
Operating humidity
Storage humidity
Linux
Built in web user interface for easy browser-based configuration (HTTP/HTTPS)
SNMP version 1, 2c, 3
Firmware upgradable through web browser
DHCP client
Infrastructure or ad hoc
Radio and modulation type: 802.11b/DSSS, 11g/OFDM
Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)
None
2 (omnidirectional) SMA detachable
Transmit power (adjustable) at normal temperature range: 802.11b: 12 ± 1 dBm; 802.11g:
16 ± 1 dBm
2
11g: 54 Mbps at -69 dBm, 11b: 11 Mbps at -82 dBm
WEP 64-bit/128-bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
MAC-based ACL between wired and wireless interfaces
IEEE 802.1X support
● 4 queues
● Queue mapping on ingress based on default priority, 802.1p tag, DSCP, and IP ToS
● Rate limiting on both ingress and egress direction
● Wi-Fi Multimedia (WMM) priority settings for wireless egress
6.69 x 8.07 x 7.68 in.
(170 x 205 x 195 mm)
12.17 oz (345 g)
12V 0.5A DC input and IEEE 802.3af-compliant PoE
Maximum power draw: 4.2W
FCC, ICES-003, CE
32º to 104ºF (0º to 40ºC)
-4º to 158ºF (-20º to 70ºC)
10% to 85% noncondensing
5% to 90% noncondensing
Data Sheet
Page 3 of 4
Advertisement
