GMC 2010 Yukon/Yukon XL Owner's Manual page 319

To stop playing a DVD without turning off the system,
press the button on the remote control, or press the
softkey under the stop or the play/pause tab displayed
on the radio. If the radio head is sourced to something
other than DVD-V, press the DVD/CD AUX button to
make DVD-V the active source.
To resume DVD playback, press the
on the remote control, or press the softkey under the
play/pause tab displayed on the radio. The DVD should
resume play from where it last stopped if the disc has
not been ejected and the stop button has not been
pressed twice on the remote control. If the disc has
been ejected or the stop button has been pressed twice
on the remote control, the disc resumes playing at the
beginning of the disc.
disc load or eject problems.
is inserted with the disc label wrong side up, or if the
disc is damaged.
/ button is not from a correct region.
is present when the
pressed on the radio.
This message displays when there are
This message displays, if the disc
This message displays, if the disc
This message displays, if no disc
or DVD/CD AUX button is
4-97