Comdial GCA70-25 Station User's Manual page 60

Glossary
Privacy
Line feature, assigned by the programmer, to allow only one station to access a line at any time;
no other station has access to the line unless the user makes it available through conferencing.
Programmable Buttons Each telephone or station has buttons that can be user-programmed for
autodialing numbers or feature codes, or other special purpose dialing requirements.
Pulse/Tone Switching
Changing from pulse/rotary dial signals to tone/DTMF signals.
Q
Queue
Method by which a station user waits for an available line by dialing a code and waiting for the
system to call back.
R
Response Messaging
Responding non-verbally to a calling station by pressing a programmed button that sends a
message to the calling station's display.
Ringing Line Preference
An automatic connection to any outside line ringing at the station when the station handset is
taken off-hook.
Ringing Tones, Personal
A telephone can be arranged to ring in one of six distinctive tones.
S
Saved Number Redialing
Saving a last manually dialed number for later autodialing.
Screened Call Transfer
Allows users to first announce and then transfer both line and intercom calls from one station or
group to another.
Service Observing
Class of service programming option allows users to enter an in-progress call in an unannounced
muted mode to monitor the call.
Speed Dialing
Autodialing using the keypad buttons. Speed dialing can be station calls (personal and accessed
by only one specific user) or system calls (numbers used and accessed by anyone in the system).
54 Single Line Proprietary Telephone Station User's Guide
GCA70-251