Cadillac 2011 DTS Owner's Manual page 266

If an unwanted number is recognized by the system,
say Clear at any time to clear the last number.
To hear all of the numbers recognized by the system,
say Verify at any time.
1. Press and hold
2. Say Digit Dial.
3. Say each digit, one at a time, that you want to dial.
After each digit is entered, the system repeats
back the digit it heard followed by a tone. After the
last digit has been entered, say Dial.
Once connected, the person called will be heard
through the audio speakers.
1. Press and hold
2. After the tone, say Re dial.
Once connected, the person called will be heard
through the audio speakers.
When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
Press to answer the call.
Press to ignore a call.
4-108
for two seconds.
for two seconds.
Call waiting must be supported on the cell phone and
enabled by the wireless service carrier.
Press to answer an incoming call when
another call is active. The original call is placed
on hold.
Press again to return to the original call.
To ignore the incoming call, no action is required.
Press to disconnect the current call and
switch to the call on hold.
Three way calling must be supported on the cell phone
and enabled by the wireless service carrier.
1. While on a call, press
2. Say Three way call.
3. Use the dial or call command to dial the number of
the third party to be called.
4. Once the call is connected, press
the callers together.
Press to end a call.
.
to link all