Page 1 2011 Cadillac DTS Owner Manual In Brief ..........1-1 Theft-Deterrent Systems .
Page 2 2011 Cadillac DTS Owner Manual Service and Appearance Care ....6-1 Maintenance Schedule ......7-1 Service .
Page 3: Canadian Owners
P.O. Box 07130 manual including, but not limited to, GM, the GM logo, Detroit, MI 48207 CADILLAC, the CADILLAC Crest and Wreath, and DTS 1-800-551-4123 are trademarks and/or service marks of General Motors LLC, its subsidiaries, affiliates, or licensors.
Page 4: Vehicle Symbols
Safety Warnings and Symbols A circle with a slash through it is a safety Warning messages found on vehicle labels and in this symbol which means Do manual describe hazards and what to do to avoid or Not, Do not do this, or reduce them.
Page 5: Index
Vehicle Symbol Chart : Fuel Gauge Here are some additional symbols that may be found on : Fuses the vehicle and what they mean. For more information : Headlamp High/Low-Beam Changer on the symbol, refer to the Index. : LATCH System Child Restraints : Airbag Readiness Light : Malfunction Indicator Lamp : Air Conditioning...
Page 6 NOTES...
Page 7: In Brief
Section 1 In Brief Instrument Panel ........1-2 Vehicle Features .
Page 8: Instrument Panel
Instrument Panel Console-Shift Model shown, Column-Shift Model similar...
Page 9 A. Outlet Adjustment on page 4 40. O. Hood Release on page 6 13. B. Driver Information Center (DIC) Buttons. See P. Parking Brake on page 3 29. Driver Information Center (DIC) on page 4 59. Q. Data Link Connector (DLC). See Malfunction C.
Page 10: Initial Drive Information
Initial Drive Information Press to lock all doors. This section provides a brief overview about some of Lock and unlock feedback can be personalized. the important features that may or may not be on your Press and hold for approximately one second to specific vehicle.
Page 11: Canceling A Remote Start
When the vehicle starts, the parking lamps will turn on Power Door Locks and remain on as long as the engine is running. The On vehicles with power door locks, the switches are doors will be locked and the climate control system may located on the front doors.
Page 12: Seat Adjustment
Windows Seat Adjustment Power Seats The power seat controls are on the outboard side of the seat. On vehicles with power windows, the switches are on Move the seat forward or rearward by moving the the driver door armrest. Each passenger door has a control forward or rearward.
Page 13 Power Reclining Seatbacks Power Lumbar Adjustment The control is located on the outboard side of the seat. The control is located on the outboard side of the seat. To raise or recline the seatback, tilt the top of the Press the front or rear of the control to increase or control forward or rearward.
Page 14: Memory Features
Memory Features To recall the memory positions, press and release 1 or 2. The vehicle must be in P (Park). A single beep will sound. The seat, outside mirrors, and steering wheel will move to the position previously stored for the identified driver.
Page 15: Head Restraint Adjustment
Heated and Ventilated Seats Head Restraint Adjustment The vehicle's front seats have adjustable head restraints in the outboard seating positions. Do not drive until the head restraints for all occupants are installed and adjusted properly. To achieve a comfortable seating position, change the seatback recline angle as little as necessary while keeping the seat and the head restraint height in the proper position.
Page 16: Sensing System For Passenger Airbag
Safety Belt Sensing System for Passenger Airbag The passenger sensing system will turn off the right front passenger frontal airbag and seat mounted side impact airbag under certain conditions. The driver airbags and roof rail airbags are not affected by this. The passenger airbag status indicator will be visible on the overhead console when the vehicle is started.
Page 17: Interior Mirror
Mirror Adjustment To fold the mirrors: Press the selector switch (C) to fold the mirrors out, Exterior Mirrors then press (D) to fold the mirror toward the vehicle. Controls for the outside The vehicle may also have an automatic dimming power folding mirrors are feature on the driver side mirror that adjusts for the located on the driver door...
Page 18: Steering Wheel Adjustment
Steering Wheel Adjustment This feature allows the position of the steering wheel to be adjusted. The adjustment lever is located on the left side of the steering column. For vehicles with a power tilt wheel control: Push the control up or down to tilt the steering wheel up or down.
Page 19: Interior Lighting
Interior Lighting Exterior Lighting Courtesy Lamps This control is located on the instrument panel, to The courtesy lamps are located on the headliner above the left of the steering the rear seat. These lamps come on by turning the wheel. instrument panel brightness knob fully clockwise or when any door is opened and it is dark outside.
Page 20: Windshield Wiper/Washer
Windshield Wiper/Washer 9: Turns the wipers off. : Press and release this paddle, located at the top of the turn signal/multifunction lever, to spray washer fluid on the windshield. See Windshield Wipers on page 4 10 and Windshield Washer on page 4 11. Climate Controls The windshield wiper lever is located on the left side of the steering column.
Page 21: Vehicle Features
Vehicle Features Radio(s) Dual Climate Control System for Vehicles with Rear Climate Control A. Fan Control F. Outside Air or AUX B. Display G. Air Recirculation C. Air Delivery Mode H. PASS (Passenger Control Climate Control) D. Driver and Passenger I.
Page 22: Storing A Favorite Station
The radio clock and analog clock are not synchronized. Satellite Radio Service, MP3/WMA, and RDS Occasionally you might need to set the digital radio Features): Press this button to display additional text clock using the procedure below to synchronize both information related to the current FM-RDS or XM clocks.
Page 23: Portable Audio Devices
Setting the Time and Date A fee is required to receive the XM service. (Single CD Player) For more information, refer to: 1. Turn the radio on. www.xmradio.com or call 1-800-929-2100 (U.S.) www.xmradio.ca or call 1-877-438-9677 (Canada) 2. Press and HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) displays.
Page 24 Steering Wheel Controls ¨ : Press seek the next radio station, or to select tracks on a CD or DVD. If equipped, these For more information, see Audio Steering Wheel controls are located on Controls on page 4 114. the right side of the steering wheel.
Page 25 Driver Information Center (DIC) : Press to customize the feature settings on your vehicle. See DIC Vehicle Customization on page 4 77 The DIC display is located at the bottom of the for more information. instrument panel cluster. It shows the status of : Press to reset certain DIC features and to many vehicle systems and enables access to the acknowledge DIC warning messages and clear them...
Page 26 Cruise Control For more information, see Cruise Control on page 4 12. For vehicles with adaptive cruise control, The cruise control buttons see Adaptive Cruise Control on page 4 14. are located on the left Power Outlets side of the steering wheel. The accessory power outlets can be used to plug in electrical equipment, such as a cell phone or MP3 player.
Page 27: Performance And Maintenance
Performance and Maintenance Tire Pressure Monitor This vehicle may have a Tire Pressure Monitor Traction Control System (TCS) System (TPMS). The traction control system limits wheel spin. The The TPMS warming light system turns on automatically every time the vehicle is alerts you to a significant started.
Page 28: Driving For Better Fuel Economy
Tire Sealant and Compressor Kit Driving for Better Fuel Economy This vehicle may come with a jack and spare tire or a Driving habits can affect fuel mileage. Here are some tire sealant and compressor kit. The kit can be used to driving tips to get the best fuel economy possible.
Page 29: How Onstar Service Works
OnStar U.S. or Canada: 1-800-882-1112 TTY Users: 1-888-889-2438 As the owner of a new Cadillac, you are automatically enrolled in the Roadside Service program which is available 24 hours a day, 365 days a year to give minor repair information or make towing arrangements.
Page 30 OnStar service requires wireless communication : Push this button for hands free, voice activated networks and the Global Positioning System (GPS) calling and to give voice commands for Hands Free satellite network. Not all OnStar services are available Calling and Turn by Turn Navigation. everywhere or on all vehicles at all times.
Page 31: Your Responsibility
See Radio Frequency Statement on page 8 18 Your Responsibility for information regarding Part 15 of the Federal Increase the volume of the radio if the OnStar advisor Communications Commission (FCC) rules and Industry cannot be heard. Canada Standards RSS-210/220/310. If the light next to the OnStar buttons is red, the system OnStar Steering Wheel Controls may not be functioning properly.
Page 32 NOTES 1-26...
Page 33: Table Of Contents
Section 2 Seats and Restraint System Head Restraints ........2-2 Where to Put the Restraint .
Page 34: Head Restraints
Head Restraints The front seats have adjustable head restraints in the outboard seating positions. WARNING: With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly.
Page 35 Front Seats Power Seats The power seat controls are on the outboard side of the seats. Pull the head restraint up to raise it. To lower the head restraint, press the button, located on the top of the seatback, and push the restraint down. Move the seat forward or rearward by sliding the Push down on the head restraint after the button is control forward or rearward.
Page 36 Power Lumbar Massaging Lumbar The power lumbar On vehicles with this controls are located on feature, the switch is the outboard side of the located on the outboard front seats. side of the front seats behind the lumbar switch. Press the front or rear of the lumbar control to increase Press the switch to turn the massaging lumbar feature or decrease support.
Page 37 Heated and Ventilated Seats On vehicles with this feature, the buttons are on the front doors. WARNING: If you cannot feel temperature change or pain to the skin, the seat heater may cause burns even at low temperatures. To reduce the risk of burns, people with such a condition should use care when using the seat heater, especially for long periods of time.
Page 38: Front Seats
Remote Start Heated Front Seats Storing Memory Positions During a remote start, the front heated seats can be To save into memory: turned on automatically. They are canceled when the 1. Adjust the driver seat, including the seatback ignition is turned on. Press the button to use the heated recliner and lumbar, both outside mirrors, and the seats after the vehicle is started.
Page 39 To stop recall movement, press one of the power seat If the easy exit seat feature is programmed on in the controls, memory or power mirror buttons, or the power vehicle customization menu, automatic seat and tilt wheel control. steering column movement occur when the ignition key is removed.
Page 40 Press the control toward the rear of the vehicle to Power Reclining Seatbacks recline the seatback. Press the control toward the front of the vehicle to WARNING: raise the seatback. WARNING: You can lose control of the vehicle if you try to adjust the seat while the vehicle is moving.
Page 41: Center Seat
Center Seat The vehicle may have a front center seat. This seat can be converted to a storage area by lowering the Do not have a seatback reclined if the vehicle is seatback. See Center Flex Storage Unit on page 3 54. moving.
Page 42: Heated Seats
Rear Seats (Heated Seatback): Press to turn on the heated seatback. (Heated Seat and Seatback): Press to turn on the Heated Seats heated seat and seatback. Press a button to turn on the desired feature. A light on WARNING: that button will display to show which feature is on. Each feature has three temperature settings indicated by three lights next to the buttons.
Page 43: Safety Belts
Safety Belts WARNING: Safety Belts: They Are for Everyone It is extremely dangerous to ride in a cargo This section of the manual describes how to use safety area, inside or outside of a vehicle. In a collision, belts properly. It also describes some things not to do people riding in these areas are more likely to with safety belts.
Page 44: Why Safety Belts Work
After more than 40 years of safety belts in vehicles, the facts are clear. In most crashes buckling up does matter ... a lot! Why Safety Belts Work When you ride in or on anything, you go as fast as it goes.
Page 45 Get it up to speed. Then stop the vehicle. The rider The person keeps going until stopped by something. In does not stop. a real vehicle, it could be the windshield... 2-13...
Page 46 or the instrument panel... or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. 2-14...
Page 47: Questions And Answers About Safety Belts
Questions and Answers About Safety Q: If I am a good driver, and I never drive far from home, why should I wear safety belts? Belts A: You may be an excellent driver, but if you are in a crash even one that is not your fault you and Q: Will I be trapped in the vehicle after a crash if I...
Page 48 Occupants who are not buckled up can be thrown out of In a crash, this applies force to the strong pelvic bones the vehicle in a crash. And they can strike others in the and you would be less likely to slide under the lap belt. vehicle who are wearing safety belts.
Page 49 Q: What is wrong with this? WARNING: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit snugly against your body. A: The shoulder belt is too loose.
Page 50 Q: What is wrong with this? WARNING: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs.
Page 51 Q: What is wrong with this? WARNING: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries.
Page 52 Q: What is wrong with this? WARNING: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries.
Page 53 Q: What is wrong with this? WARNING: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones.
Page 54 Q: What is wrong with this? WARNING: You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury.
Page 55 Q: What is wrong with this? WARNING: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it.
Page 56: Lap-Shoulder Belt
Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder except for the center front passenger position (if equipped), which has a lap belt. See Lap Belt on page 2 29 for more information. The following instructions explain how to wear a lap-shoulder belt properly.
Page 57 4. If equipped with a shoulder belt height adjuster, move it to the height that is right for you. See Shoulder Belt Height Adjuster later in this section for instructions on use and important safety information. To unlatch the belt, push the button on the buckle. The belt should return to its stowed position.
Page 58 Shoulder Belt Height Adjuster After the adjuster is set to the desired position, try to move it down without pressing the release button to The vehicle has a shoulder belt height adjuster for the make sure it has locked into position. driver and right front passenger seating positions.
Page 59: Rear Safety Belt Comfort Guides
Rear Safety Belt Comfort Guides This vehicle may have rear shoulder belt comfort guides for each outside passenger position in the rear seat. If not, they are available through your dealer. The guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults.
Page 60 WARNING: (Continued) The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top.
Page 61: Safety Belt Use During Pregnancy
To remove and store the comfort guide, squeeze the The best way to protect the fetus is to protect the belt edges together so that the safety belt can be mother. When a safety belt is worn properly, it is more removed from the guide.
Page 62 To make the belt longer, tilt the latch plate and pull it To make the belt shorter, pull its free end as shown until along the belt. the belt is snug. Buckle, position and release it the same way as the lap If the belt is not long enough, see Safety Belt Extender part of a lap-shoulder belt.
Page 63: Safety Belt Extender
If you find that the latch plate will not go fully into the Child Restraints buckle, see if you are using the correct buckle. Be sure that the latch plate clicks when inserted into the buckle. Older Children Safety Belt Extender If the vehicle's safety belt will fasten around you, you should use it.
Page 64 Buckle the lap-shoulder belt. Does the shoulder Also see Rear Safety Belt Comfort Guides under belt rest on the shoulder? If yes, continue. If no, try Lap-Shoulder Belt on page 2 24. using the rear safety belt comfort guide. See Rear According to accident statistics, children and infants are Safety Belt Comfort Guides under Lap-Shoulder safer when properly restrained in a child restraint...
Page 65 WARNING: (Continued) head and neck injury. The child might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries. The shoulder belt should go over the shoulder and across the chest. WARNING: Never do this.
Page 66: Infants And Young Children
Infants and Young Children Airbags plus lap shoulder belts offer protection for adults and older children, but not for young children and Everyone in a vehicle needs protection! This includes infants. Neither the vehicle's safety belt system nor its infants and all other children. Neither the distance airbag system is designed for them.
Page 67 WARNING: (Continued) It is also better to secure a forward-facing child restraint in a rear seat. If you must secure a forward-facing child restraint in the right front seat, always move the front passenger seat as far back as it will go. WARNING: Never do this.
Page 68 Q: What are the different types of add-on child restraints? WARNING: A: Add-on child restraints, which are purchased by the vehicle's owner, are available in four basic types. To reduce the risk of neck and head injury during Selection of a particular restraint should take into a crash, infants need complete support.
Page 69: Child Restraint Systems
Child Restraint Systems WARNING: A rear-facing infant seat (A) provides restraint A young child's hip bones are still so small that with the seating surface against the back of the the vehicle's regular safety belt may not remain infant. low on the hip bones, as it should. Instead, it may settle up around the child's abdomen.
Page 70 Securing an Add-On Child Restraint in the Vehicle WARNING: A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle's safety belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual.
Page 71: Where To Put The Restraint
When securing an add-on child restraint, refer to the Securing the Child Within the Child instructions that come with the restraint which may be Restraint on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy WARNING: from the manufacturer.
Page 72: Position
A label on your sun visor says, Never put a rear-facing child seat in the front. This is because the risk to the WARNING: (Continued) rear-facing child is so great, if the airbag deploys. Secure rear-facing child restraints in a rear WARNING: seat, even if the airbag is off.
Page 73: Lower Anchors And Tethers For Children (Latch)
Do not use child restraints in the center front seat Lower Anchors and Tethers for position. Children (LATCH) When securing a child restraint in a rear seating The LATCH system holds a child restraint during position, study the instructions that came with your child driving or in a crash.
Page 74: Top Tether Anchor
Lower Anchors Top Tether Anchor Lower anchors (A) are metal bars built into the vehicle. A top tether (A, C) anchors the top of the child restraint There are two lower anchors for each LATCH seating to the vehicle. A top tether anchor is built into the position that will accommodate a child restraint with vehicle.
Page 75 Some child restraints that have top tethers are designed To assist you in locating for use with or without the top tether being attached. the lower anchors, each Others require the top tether always to be attached. seating position with lower In Canada, the law requires that forward-facing child anchors has two labels, restraints have a top tether, and that the tether be...
Page 76: Securing A Child Restraint Designed For The Latch System
According to accident statistics, children and infants The top tether anchors are located under the covers on are safer when properly restrained in a child restraint the rear seatback filler panel. Pull open the cover to system or infant restraint system secured in a rear access the anchors.
Page 77 Notice: Do not let the LATCH attachments rub WARNING: against the vehicle s safety belts. This may damage these parts. If necessary, move buckled safety belts to avoid rubbing the LATCH attachments. Do not attach more than one child restraint to a Do not fold the empty rear seat with a safety belt single anchor.
Page 78 2. If the child restraint manufacturer recommends that If the position you are the top tether be attached, attach and tighten the using has a fixed or top tether to the top tether anchor, if equipped. adjustable headrest or Refer to the child restraint instructions and the head restraint and you are following steps: using a dual tether, route...
Page 79: Seat Position
3. Before placing a child in the child restraint, make In Canada, the law requires that forward-facing child sure it is securely held in place. To check, grasp restraints have a top tether, and that the tether be the child restraint at the LATCH path and attempt attached.
Page 80 3. Push the latch plate into the buckle until it clicks. 4. Pull the shoulder belt all the way out of the retractor to set the lock. When the retractor lock is Position the release button on the buckle so that set, the belt can be tightened but not pulled out of the safety belt could be quickly unbuckled if the retractor.
Page 81 6. If the child restraint has a top tether, follow the child restraint manufacturer's instructions regarding the use of the top tether. See Lower Anchors and Tethers for Children (LATCH) on page 2 41 for more information. 7. Before placing a child in the child restraint, make sure it is securely held in place.
Page 82: Securing A Child Restraint In The Right Front
Securing a Child Restraint in the In addition, the vehicle has a passenger sensing system which is designed to turn off the right front passenger Center Front Seat Position frontal airbag and seat-mounted side impact airbag under certain conditions. See Passenger Sensing System on page 2 64 and Passenger Airbag Status WARNING: Indicator on page 4 48 for more information, including...
Page 83 Do not secure a child seat in a position without a top WARNING: (Continued) tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top strap must be Even if the passenger sensing system has turned anchored.
Page 84 4. Push the latch plate into the buckle until it clicks. 5. Pull the shoulder belt all the way out of the retractor to set the lock. When the retractor lock is Position the release button on the buckle so that set, the belt can be tightened but not pulled out of the safety belt could be quickly unbuckled if the retractor.
Page 85 7. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the safety belt path and attempt to move it side to side and back and forth. When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement.
Page 86: Airbag System
Airbag System All of the airbags in your vehicle will have the word AIRBAG embossed in the trim or on an attached label The vehicle has the following airbags: near the deployment opening. A frontal airbag for the driver. For frontal airbags, the word AIRBAG will appear on the middle part of the steering wheel for the driver and on A frontal airbag for the right front passenger.
Page 87 Here are the most important things to know about the airbag system: WARNING: WARNING: Airbags inflate with great force, faster than the blink of an eye. Anyone who is up against, or very close to, any airbag when it inflates can be You can be severely injured or killed in a crash if seriously injured or killed.
Page 88 There is an airbag WARNING: readiness light on the instrument panel, which shows the airbag symbol. Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants.
Page 89: Where Are The Airbags
Where Are the Airbags? The right front passenger frontal airbag is in the instrument panel on the passenger's side. The driver frontal airbag is in the middle of the steering wheel. 2-57...
Page 90 Driver Side shown, Passenger Side similar Driver Side shown, Passenger Side similar The seat-mounted side impact airbags for the driver and If the vehicle has roof-rail airbags for the driver, right right front passenger are in the side of the seatbacks front passenger, and second row outboard passengers, closest to the door.
Page 91: When Should An Airbag Inflate
When Should an Airbag Inflate? WARNING: Frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes to help reduce the potential for severe injuries mainly to the driver's or If something is between an occupant and an right front passenger's head and chest.
Page 92 If the vehicle hits a narrow object (like a pole), the Your vehicle also has a dual-depth passenger airbag airbags could inflate at a different crash speed that adjusts the restraint according to crash severity, than if the vehicle hits a wide object (like a wall). seat location, and safety belt status using electronic frontal sensor(s) and other special sensors which If the vehicle goes into an object at an angle, the...
Page 93: What Makes An Airbag Inflate
In any particular crash, no one can say whether an How Does an Airbag Restrain? airbag should have inflated simply because of the In moderate to severe frontal or near frontal collisions, damage to a vehicle or because of what the repair even belted occupants can contact the steering wheel costs were.
Page 94: What Will You See After An Airbag Inflates
What Will You See After an Airbag WARNING: Inflates? After the frontal airbags and seat-mounted side impact When an airbag inflates, there may be dust in the airbags inflate, they quickly deflate, so quickly that air. This dust could cause breathing problems for some people may not even realize an airbag inflated.
Page 95 In many crashes severe enough to inflate the airbag, WARNING: windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger airbag. A crash severe enough to inflate the airbags may Airbags are designed to inflate only once. After an have also damaged important functions in the airbag inflates, you will need some new parts for vehicle, such as the fuel system, brake and...
Page 96: Passenger Sensing System
Passenger Sensing System The passenger sensing system works with sensors that are part of the right front passenger seat. The The vehicle has a passenger sensing system for the sensors are designed to detect the presence of a right front passenger position. The passenger airbag properly-seated occupant and determine if the right status indicator will be visible on the overhead console front passenger frontal airbag and seat mounted side...
Page 97 The system determines that a small child is present in a child restraint. WARNING: (Continued) The system determines that a small child is present in a booster seat. forward-facing child restraint can be seriously A right front passenger takes his/her weight off of injured or killed if the right front passenger airbag the seat for a period of time.
Page 98 For some children who have outgrown child restraints 3. Remove any additional items from the seat such and for very small adults, the passenger sensing as blankets, cushions, seat covers, seat heaters, system may or may not turn off the right front passenger or seat massagers.
Page 99 If the Off Indicator is Lit for an If this happens, use the following steps to allow the system to detect that person and enable the right front Adult-Size Occupant passenger frontal airbag and seat-mounted side impact airbag: 1. Turn the vehicle off. 2.
Page 100: Servicing Your Airbag-Equipped Vehicle
A thick layer of additional material, such as a blanket Servicing Your Airbag-Equipped or cushion, or aftermarket equipment such as seat Vehicle covers, seat heaters, and seat massagers can affect how well the passenger sensing system operates. We Airbags affect how the vehicle should be serviced. recommend that you not use seat covers or other There are parts of the airbag system in several places aftermarket equipment except when approved by...
Page 101 Adding Equipment to Your installed under or on top of the seat fabric, could also interfere with the operation of the passenger Airbag-Equipped Vehicle sensing system. This could either prevent proper deployment of the passenger airbag(s) or prevent Q: Is there anything I might add to or change about the passenger sensing system from properly turning the vehicle that could keep the airbags from off the passenger airbag(s).
Page 102: Restraint System Check
Restraint System Check Airbags The airbag system does not need regularly scheduled Checking the Restraint Systems maintenance or replacement. Make sure the airbag readiness light is working. See Airbag Readiness Light Safety Belts on page 4 48 for more information. Notice: If an airbag covering is damaged, opened, Now and then, check that the safety belt reminder light, or broken, the airbag may not work properly.
Page 103: Replacing Restraint System Parts After A
Replacing Restraint System Parts If the vehicle has the LATCH system and it was being used during a crash, you may need new LATCH system After a Crash parts. New parts and repairs may be necessary even if the WARNING: safety belt or LATCH system (if equipped), was not being used at the time of the crash.
Page 104 NOTES 2-72...
Page 105: Features And Controls
Section 3 Features and Controls Keys ..........3-3 Starting and Operating Your Vehicle .
Page 106 Section 3 Features and Controls Object Detection Systems ..... . . 3-38 Storage Areas ........3-54 Ultrasonic Front and Rear Parking Assist Glove Box .
Page 107: Keys
Keys WARNING: Leaving children in a vehicle with the ignition key is dangerous for many reasons. Children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and children could be seriously injured or killed if caught in the path of a closing window.
Page 108: Remote Keyless Entry (Rke) System
Remote Keyless Entry (RKE) System Remote Keyless Entry (RKE) System Operation See Radio Frequency Statement on page 8 18 for information regarding Part 15 of the Federal The Remote Keyless Entry (RKE) transmitter functions Communications Commission (FCC) rules and Industry work up to 60 m (195 feet) away from the vehicle.
Page 109 (Lock): Press to lock all the doors. If enabled (Vehicle Locator/Panic Alarm): Press and release through the Driver Information Center (DIC), the parking to locate the vehicle. The turn signal lamps flash and lamps may flash once to indicate locking has occurred. the horn sounds three times.
Page 110: Battery Replacement
Programming Transmitters to the Vehicle Only RKE transmitters programmed to the vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer. When the replacement transmitter is programmed to the vehicle, all remaining transmitters must also be programmed.
Page 111: Remote Vehicle Start
Remote Vehicle Start There are other conditions which can affect the performance of the transmitter, see Remote Keyless The remote vehicle starting feature allows you to start Entry (RKE) System Operation on page 3 4 for the engine from outside of the vehicle. It also starts up additional information.
Page 112: Remote Start Ready
If the vehicle is left running it will automatically shut Once two remote starts or a single start with a time off after 10 minutes unless a time extension has extension have been used, the vehicle must be started been done. with the ignition key before you can use the remote start feature again.
Page 113: Doors And Locks
Doors and Locks WARNING: (Continued) Door Locks Outsiders can easily enter through an unlocked door when you slow down or stop WARNING: your vehicle. Locking your doors can help prevent this from happening. Unlocked doors can be dangerous. There are several ways to lock and unlock your vehicle. Passengers, especially children, can easily open the doors and fall out of a moving Because the vehicle has the theft-deterrent system, you...
Page 114: Central Door Unlocking System
Central Door Unlocking System If someone needs to get out while the vehicle is not in P (Park), have the person use the manual lock knob or The vehicle has a central door unlocking mode. When power door lock switch. When the door is closed again, unlocking the driver door, the other doors can be it will not lock automatically.
Page 115: Lockout Protection
To assist in finding the lock, the vehicle has the To open a rear door when the security lock is on, do the following: following: 1. Unlock the door using the Remote Keyless Entry (RKE) transmitter, if the vehicle has one, the power door lock switch, or by lifting the rear door manual lock.
Page 116: Trunk
Trunk Remote Trunk Release (Remote Trunk Release): The remote trunk release button is located to the left of the steering wheel WARNING: next to the instrument panel brightness control. Press the button to open the trunk. The vehicle must be in P (Park) or N (Neutral) and the valet lockout switch must Exhaust gases can enter the vehicle if it is driven be off to use this button.
Page 117: Emergency Trunk Release Handle
Emergency Trunk Release Handle There is a glow-in-the-dark emergency trunk release handle located inside the trunk near the latch. This handle will glow following exposure to light. Pull the release handle to open the trunk from the inside. Rear Seat Pass Through The vehicle has a small door in the rear seat.
Page 118: Windows
Windows WARNING: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 119: Power Windows
Power Windows The power window switches are located on the driver door. WARNING: Leaving children in a vehicle with the keys is dangerous for many reasons. Children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move.
Page 120 Express-Down/Up Windows Express Window Anti Pinch Override Windows with the express feature allow the windows to be raised and lowered all the way without holding the WARNING: switch. Press or pull the switch fully and release it to activate If express override is activated, the window will the express feature.
Page 121: Sun Visors
Programming the Power Windows Window Lockout If the battery on the vehicle has been recharged, (Window Lockout): The rear window lockout button disconnected, or is not working, you will need to is located on the driver door near the window switches. reprogram each front power window for the express-up Press the right side of the button to disable the rear feature to work.
Page 122: Theft-Deterrent Systems
Rear Power Sunshade Theft-Deterrent Systems If your vehicle has a rear power sunshade, it helps to This vehicle has theft-deterrent features, however, they reduce the amount of heat and light entering the rear do not make it impossible to steal. window.
Page 123: Content Theft-Deterrent
(On): Press this side of the button to turn the lockout To arm the system: feature on. When the lockout feature is turned on, 1. Open the door. the trunk cannot be unlocked with the keyless entry transmitter or the trunk release button located near the 2.
Page 124: Pass-Key Iii+ Electronic Immobilizer
If you activate the alarm by accident, unlock the driver's If the alarm does not sound when it should, check to door with your key. You can also turn off the alarm by see if the horn works. The horn fuse may be blown. To using the unlock button on the RKE transmitter system, replace the fuse, see Fuses and Circuit Breakers on or by starting the car with a valid key.
Page 125 The security light will come on if there is a problem with See your dealer or a locksmith who can service ® arming or disarming the theft-deterrent system. PASS-Key III+ to get a new key blank that is cut exactly as the ignition key that operates the system. ®...
Page 126: Starting And Operating Your Vehicle
Starting and Operating Your Ignition Positions Vehicle The ignition switch has four different positions: New Vehicle Break-In Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: Do not drive at any one constant speed, fast or slow, for the first 500 miles (805 km).
Page 127 A (STOPPING THE ENGINE/LOCK/OFF): When the The steering can bind with the wheels turned off center. vehicle is stopped, turn the ignition switch to LOCK/OFF If this happens, move the steering wheel from right to to turn the engine off. Retained Accessory Power (RAP) left while turning the key to ACC/ACCESSORY.
Page 128: Starting Procedure
Retained Accessory Power (RAP) Starting Procedure 1. With your foot off the accelerator pedal, turn the These vehicle accessories can be used for up to ignition to START. When the engine starts, let 10 minutes after the ignition key is turned off: go of the key.
Page 129: Engine Coolant Heater
Notice: Cranking the engine for long periods of Notice: The engine is designed to work with the time, by returning the key to the START position electronics in the vehicle. If you add electrical immediately after cranking has ended, can overheat parts or accessories, you could change the way and damage the cranking motor, and drain the the engine operates.
Page 130: Automatic Transmission Operation
To Use the Engine Coolant Heater The length of time the heater should remain plugged in depends on several factors. Ask a dealer in the area 1. Turn off the engine. where you will be parking the vehicle for the best advice on this.
Page 131 Make sure the shift lever is fully in P (Park) before WARNING: starting the engine. The vehicle has an automatic transmission shift lock control system. You have to fully apply the regular brakes before you can shift from It is dangerous to get out of the vehicle if the shift P (Park) while the ignition key is in ON/RUN.
Page 132 N (Neutral): In this position, the engine does not D (Drive): This position is for normal driving. It provides connect with the wheels. To restart when you are the best fuel economy for the vehicle. If you need more already moving, use N (Neutral) only. Also, use power for passing, and you are: N (Neutral) when the vehicle is being towed.
Page 133: Performance Shifting
3 (Third): This position is also used for normal driving. Performance Shifting However, it reduces vehicle speed more than D (Drive) If the vehicle has this feature, it can detect a change in without using the brakes. You might choose 3 (Third) driving patterns.
Page 134: Shifting Into Park
A warning chime will sound if the parking brake is set, Shifting Into Park the ignition is on, and the vehicle speed is greater than 5 mph (8 km/h). The brake light will come on and stay WARNING: on until the parking brake is released. See Brake System Warning Light on page 4 50 for more information.
Page 135: Console Shift Lever
4. Turn the ignition key to LOCK/OFF. Leaving the Vehicle With the Engine Running 5. Remove the key and take it with you. If you can leave the vehicle with the ignition key in your hand, the vehicle is in P (Park). WARNING: Console Shift Lever If the vehicle is equipped with a console shift lever, use...
Page 136: Shifting Out Of Park
Torque Lock If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. Torque lock is when the weight of the vehicle puts too See Jump Starting on page 6 38. much force on the parking pawl in the transmission.
Page 137: Parking Over Things That Burn
Parking Over Things That Burn WARNING: (Continued) WARNING: The exhaust system leaks due to corrosion or damage. Things that can burn could touch hot exhaust The vehicle s exhaust system has been parts under the vehicle and ignite. Do not park modified, damaged or improperly repaired.
Page 138: Running The Vehicle While Parked
Running the Vehicle While Parked WARNING: It is better not to park with the engine running. But if you ever have to, here are some things to know. It can be dangerous to get out of the vehicle if the automatic transmission shift lever is not fully in WARNING: P (Park) with the parking brake firmly set.
Page 139: Mirrors
Mirrors Compass Compass Operation Automatic Dimming Rearview Mirror AUTO 3 Press , depending on the vehicle, to The vehicle has an automatic dimming inside rearview turn the compass on or off. mirror with a compass display. Automatic dimming reduces the glare of lights from behind the vehicle. When the ignition and the compass feature are on, after The dimming feature comes on and the indicator light a few seconds, the mirror will display the compass...
Page 140: Outside Power Foldaway Mirrors
Compass Variance 3. Once the zone number displays, press AUTO 3 repeatedly until the correct zone The compass is set to zone eight. If you do not live number displays. Stop pressing the button and the in zone eight or drive out of the area, the compass mirror will return to normal operation.
Page 141: Mirror Adjustment
Mirror Adjustment Outside Automatic Dimming Mirror 1. Press (C) to unfold the mirrors out to the driving If the vehicle has this feature, the driver side mirror position. adjusts for the glare of headlamps behind you. This feature is controlled by the on and off settings on the 2.
Page 142: Outside Convex Mirror
Outside Convex Mirror Object Detection Systems Ultrasonic Front and Rear Parking WARNING: Assist (UFRPA) For vehicles with the Ultrasonic Front and Rear Parking A convex mirror can make things, like other Assist (UFRPA) system, it operates at speeds less than vehicles, look farther away than they really are.
Page 143 WARNING: The Ultrasonic Front and Rear Park Assist (UFRPA) system does not replace driver vision. It cannot detect: objects that are below the bumper, underneath the vehicle, or if they are too close or far from the vehicle children, pedestrians, bicyclists, or pets. Rear Parking Assist If you do not use proper care before moving Display...
Page 144: How The System Works
How the System Works Moving Forward When the vehicle is started, the front display will briefly UFRPA comes on automatically when the shift lever is illuminate to let you know the system is working. moved out of P (Park). The system does not work at a forward or reverse speed greater than 5 mph (8 km/h).
Page 145 Backing When the System Does Not Seem to Work Properly Ultrasonic Rear Parking Assist (URPA) comes on automatically when the shift lever is moved into If the URPA system will not activate due to a temporary R (Reverse). The rear display will then briefly illuminate condition, the message PARK ASSIST OFF will be to let you know the system is working.
Page 146: Side Blind Zone Alert (Sbza)
Side Blind Zone Alert (SBZA) SBZA display, check the outside and rearview mirrors, look over your shoulder for vehicles and hazards, and The vehicle may have a Side Blind Zone Alert (SBZA) use the turn signal. system. Read this entire section before using the system.
Page 147 The SBZA detection zones do not change if the vehicle SBZA can be disabled through the Driver Information is towing a trailer. So be extra careful when changing Center (DIC). See Driver Information Center (DIC) on lanes while towing a trailer. page 4 59 for more information.
Page 148 The SBZA displays may remain on if a trailer is SERVICE SIDE BLIND ZONE ALERT SYSTEM: If this attached to the vehicle, or a bicycle or object is message appears, both SBZA displays will remain on extending out to either side of the vehicle. indicating there is a problem with the SBZA system.
Page 149: Lane Departure Warning (Ldw)
Lane Departure Warning (LDW) WARNING: (Continued) The vehicle may have a Lane Departure Warning (LDW) system. Read this entire section before using the system. LDW will indicate the system is working whenever it detects either the left or right lane marking. So if you depart on the side of the lane that LDW is not WARNING: detecting, LDW will not warn you.
Page 150 How the System Works LDW only operates at speeds of 35 mph (56 km) or greater. If LDW is turned on when traveling at LDW uses a camera located between the inside these speeds, the LDW symbol will appear green rearview mirror and the windshield to detect the lane if the system detects a left or right lane marking.
Page 151: Universal Home Remote System
LDW warnings may occasionally occur due to tar Universal Home Remote System marks, shadows, cracks in the road, or other road Operation (With Three Round LED) imperfections. This is normal system operation, the vehicle does not need service. LDW Error Message SERVICE LANE DEPARTURE SYSTEM: This message may appear in the DIC to indicate that LDW is not working properly.
Page 152 Do not use this system with any garage door opener Programming Universal Home that does not have the stop and reverse feature. This Remote Rolling Code includes any garage door opener model manufactured before April 1, 1982. For questions or help programming the Universal Home Remote System, call 1-866-572-2728 or go to Read the instructions completely before attempting to learcar2u.com.
Page 153 door moves. The indicator light, above the selected button, should slowly blink. This button may need to be held for up to 20 seconds. 4. Immediately, within one second, release the button when the garage door moves. The indicator light will blink rapidly until programming is complete.
Page 154 Programming a garage door opener involves do not see a row of dip switches, return to the time-sensitive actions, so read the entire procedure previous section for Programming Universal Home before starting. Otherwise, the device will time out and Remote Rolling Code.
Page 155 Example of Eight Dip Switches with Two Positions Example of Eight Dip Switches with Three Positions The panel of switches might not appear exactly as they do in the examples above, but they should be similar. The switch positions on the hand-held transmitter could be labeled, as follows: A switch in the up position could be labeled as Up, +, or On.
Page 156 2. Write down the eight to 12 switch settings from left to right as follows: When a switch is in the up position, write Left. When a switch is in the down position, write Right. If a switch is set between the up and down position, write Middle.
Page 157: Reprogramming Universal Home Remote Buttons
5. After entering all of the switch positions, again, Reprogramming Universal Home firmly press and release all three buttons at the Remote Buttons same time. The indicator lights will turn on. Any of the three buttons can be reprogrammed by 6.
Page 158: Storage Areas
Storage Areas front of the armrest and lift the armrest cover to access the upper storage area. Pull the strap located behind the cup holder to access the lower storage area. Glove Box Center Flex Storage Unit Lift up the glove box handle to open it. Use the key to lock and unlock the glove box.
Page 159 WARNING: (Continued) increased stopping distance which can cause a crash and injury. Make sure the floor mat does not interfere with the accelerator or brake pedal. Use the following guidelines for proper floor mat usage. The original equipment floor mats were designed for your vehicle.
Page 160: Rear Seat Armrest
Rear Seat Armrest To open or close the sunroof, the ignition must be turned to ON/RUN or Retained Accessory Power (RAP) This vehicle has a rear seat armrest with cupholders. must be active. See Retained Accessory Power (RAP) Pull the tab on the armrest forward, to access it. on page 3 24.
Page 161 Close: To close the sunroof, operate the controls according to one of the following: From the open position, press and hold the driver side sunroof switch forward. The sunshade must be closed manually. From the vent position, press and hold the passenger side sunroof switch rearward.
Page 162 NOTES 3-58...
Page 163: Instrument Panel
Section 4 Instrument Panel Instrument Panel Overview ......4-3 Entry Lighting ........4-30 Hazard Warning Flashers .
Page 164 Section 4 Instrument Panel Antilock Brake System (ABS) Warning Light . . . 4-51 Driver Information Center (DIC) ....4-59 Traction Control System (TCS) Warning DIC Operation and Displays .
Page 165: Instrument Panel Overview
Instrument Panel Overview Tilt Wheel This feature allows the position of the steering wheel to Hazard Warning Flashers be adjusted. (Hazard Warning Flasher): Press this button The adjustment lever is located on the instrument panel, to make the front and located on the left side of rear turn signal lamps flash on and off.
Page 166: Power Tilt Wheel And Telescopic Steering
Power Tilt Wheel and Telescopic Heated Steering Wheel Steering Column The vehicle may have a heated steering wheel. If the vehicle has this The button for this feature feature, the power tilt and is located on the steering telescope wheel control is wheel.
Page 167: Turn Signal/Multifunction Lever
Turn Signal/Multifunction Lever Turn and Lane-Change Signals An arrow on the instrument panel cluster flashes in the direction of the turn or lane change. For vehicles with the side blind zone alert system, an arrow in the outside mirror flashes when the turn signal is used.
Page 168: Headlamp High/Low-Beam Changer
If after signaling a turn or lane change the arrow flashes Forward Collision Alert (FCA) rapidly or does not come on, a signal bulb may be System burned out. For vehicles with this feature, read the following section Have the bulbs replaced. If the bulb is not burned out, before using it.
Page 169 The Forward Collision Alert (FCA) system provides an The FCA control is audible and visual alert if you approach a vehicle too located on the steering quickly that is directly ahead. FCA also provides a wheel. visual alert with no audible alert if you are following another vehicle much too closely.
Page 170 FCA is enabled when the green light on the button is lit. FCA is disabled when the indicator light is WARNING: amber. When FCA is enabled, the Adaptive Cruise WARNING: Control switch is on. If you press another Adaptive Cruise Control button, you might go into cruise when you do not want to.
Page 171 The alert symbol will flash when: WARNING: (Continued) Your vehicle is approaching another vehicle too quickly. when the radar is blocked by snow, ice, or dirt. Your vehicle is following a vehicle ahead of you Keep your radar clean. See Cleaning the much too closely.
Page 172: Flash-To-Pass
Other Messages Windshield Wipers There are three messages that may appear on the Driver Information Center (DIC). They are CLEAN RADAR, RADAR CRUISE NOT READY and SERVICE RADAR CRUISE. See DIC Warnings and Messages on page 4 65. Cleaning the System The radar can become blocked by snow, ice, or dirt.
Page 173: Windshield Washer
6 (Low Speed): Slow wipes. Windshield Washer 1 (High Speed): Fast wipes. 9 (Off): Turns the wipers off. WARNING: Clear ice and snow from the wiper blades before using them. If frozen to the windshield, carefully loosen or In freezing weather, do not use your washer until thaw them.
Page 174: Cruise Control
Cruise Control If your vehicle is in cruise control when the Traction Control System (TCS) begins to limit wheel spin, the With cruise control, a speed of approximately 40 km/h cruise control automatically turns off. See Traction (25 mph) or more can be maintained without keeping Control System (TCS) on page 5 6.
Page 175 SET (Set): Press to set the speed and activate cruise Resuming a Set Speed control or make the vehicle decelerate. If the cruise control is set at a desired speed and then (Cancel): Press to disengage cruise control without the brakes are applied, the cruise control is disengaged erasing the set speed from memory.
Page 176: Adaptive Cruise Control
Reducing Speed While Using Cruise Ending Cruise Control Control There are three ways to end cruise control: If the cruise control is already activated, To disengage cruise control, step lightly on the brake pedal. Press the SET button until the lower speed desired is reached, then release it.
Page 177 Changes or modifications to this system by other than an authorized service facility could void authorization to WARNING: use this equipment. Adaptive Cruise Control (ACC) is an enhancement to Adaptive Cruise Control will not apply hard traditional cruise control. It allows you to keep cruise braking or bring the vehicle to a complete control engaged in moderate traffic conditions without stop.
Page 178 WARNING: WARNING: (Continued) On slippery roads, fast changes in tire traction On winding roads, Adaptive Cruise Control can cause needless wheel spinning, and you may not detect a vehicle ahead. You could could lose control. Do not use cruise control crash into a vehicle ahead of you.
Page 179 +GAP (Increase Following Distance): Press to increase the distance between your vehicle and other vehicles. GAP (Decrease Following Distance): Press to decrease the distance between your vehicle and other vehicles. ACC will not work if the master cylinder brake fluid level is low.
Page 180 The on symbol is located on the display at the top of the Decreasing Set Speed While Using ACC instrument panel to the right of the driver. When the on If the ACC is already activated, symbol is lit on the display, it indicates that ACC is active.
Page 181 A temporary condition prohibits ACC from There are six follow distances to choose from. The operating. See DIC Warnings and Messages on follow distance selection ranges from near to far page 4 65 for more information. (one second to two seconds follow time). The distance maintained for a selected follow distance will vary A malfunction is detected in the system.
Page 182 Approaching and Following a Vehicle ACC automatically slows your vehicle down when approaching a slower moving vehicle. It then adjusts The vehicle ahead symbol your vehicle speed to follow the vehicle in front at the is located on the top of selected follow distance.
Page 183 Passing a Vehicle/ACC Override WARNING: To increase speed to pass a vehicle, use the accelerator pedal. While you are doing this, the system will not automatically apply the brakes. A message will Adaptive Cruise Control may not detect and react appear on the DIC.
Page 184 Curves in the Road WARNING: Due to Adaptive Cruise Control limitations in curves, it may respond to a vehicle in another lane, or may not have time to react to a vehicle in your lane. You could crash into a vehicle ahead of you, or lose control of your vehicle.
Page 185 Highway Exit Ramps WARNING: Adaptive Cruise Control may lose track of the vehicle ahead and accelerate up to your set speed while entering or on highway exit ramps. You could be startled by this acceleration and even lose control of the vehicle. Disengage Adaptive Cruise Control before entering a highway exit ramp.
Page 186: Other Messages
Using ACC on Hills and When Towing a Disengaging ACC Trailer To turn off the system, apply the brake pedal, press the cancel button, or press the ACC button. Erasing Set Speed Memory Press the ACC button or turn the ignition off. Other Messages There are three additional messages that may appear on the DIC.
Page 187: Exterior Lamps
Exterior Lamps AUTO (Automatic): Automatically turns on the headlamps at normal brightness, together with the The exterior lamps following: control is located on the Parking Lamps instrument panel to the Instrument Panel Lights left of the steering wheel. ® IntelliBeam ;...
Page 188 ® IntelliBeam Intelligent High-Beam Driving with IntelliBeam Headlamp Control System IntelliBeam only activates the high-beams when driving over 20 mph (32 km/h). For vehicles with this feature, be sure to read this entire section before using it. The high-beam headlamps remain on, under the automatic control of IntelliBeam, until any of the IntelliBeam is an enhancement to the vehicle's following situations occur:...
Page 189 The exterior lamp control is turned to any setting You might need to manually disable or cancel the except AUTO. high-beam headlamps by turning the low-beam headlamps on, if any of the above conditions exist. When this occurs, IntelliBeam is disabled until the control is turned back to the AUTO position.
Page 190: Wiper Activated Headlamps
Cleaning the IntelliBeam Light Sensor Headlamps on Reminder The light sensor is located A warning chime will sound if the exterior lamp control on the inside of the is left on in either the headlamp or parking lamp position vehicle in front of the and the driver's door is opened with the ignition off.
Page 191: Fog Lamps
When automatic lighting is on and it is bright enough Fog Lamps outside, the regular lamps go off, and the DRL takes The fog lamps button is on the exterior lamps control to over. If the vehicle is started in a dark garage, the the left of the steering column.
Page 192: Exterior Lighting Battery Saver
Exterior Lighting Battery Saver Courtesy Lamps If the exterior lamp button has been left on, the exterior The courtesy lamps are located on the headliner above lamps will turn off about 10 minutes after the ignition is the rear seat. These lamps come on by turning the turned to LOCK/OFF and a door has been opened.
Page 193: Parade Dimming
Parade Dimming Footwell lighting brightness can be adjusted with the instrument panel brightness control located below the This feature prohibits dimming of the digital displays exterior lamps control. See Instrument Panel Brightness and backlighting during daylight hours when the key is on page 4 30.
Page 194: Electric Power Management
Electric Power Management EPM works to prevent excessive discharge of the battery. It does this by balancing the generator's output The vehicle has Electric Power Management (EPM) that and the vehicle's electrical needs. It can increase estimates the battery's temperature and state of charge. engine idle speed to generate more power, whenever It then adjusts the voltage for best performance and needed.
Page 195: Battery Run-Down Protection
Battery Run-Down Protection There are two accessory power outlets in the rear seat area located on the door armrests next to the ashtrays. This feature helps prevent the battery from being Remove the cover to access and replace when not drained, if the interior courtesy lamps, reading/map in use.
Page 196: Analog Clock
When adding electrical equipment, be sure to follow Climate Controls the proper installation instructions included with the equipment. See Add-On Electrical Equipment on Dual Climate Control System page 6 103. The heating, cooling, and ventilation for the vehicle can Notice: Hanging heavy equipment from the power be controlled with this system.
Page 197: Automatic Operation
To use automatic operation: 1. Turn the fan control to the AUTO position. 2. Turn the air delivery mode to the AUTO position. 3. Adjust the temperature to a comfortable setting between 21°C (68°F) and 26°C (78°F). Choosing the coldest or warmest temperature setting will not cause the system to heat or cool any faster.
Page 198: Manual Operation
If the AUTO position is selected on the fan or mode Manual Operation control, the system automatically controls the air (Off): Turns the entire climate control system off. conditioning compressor. The A/C compressor will run Outside air still enters the vehicle and is directed to the automatically even at cool outside temperatures in order floor.
Page 199 Air Delivery Mode Control: Turn clockwise or (Defrost): This mode clears the windshield of fog counterclockwise to change the current airflow mode. or frost more quickly. Air is directed to the windshield and side window outlets. When selected, the system Select one of the following: automatically turns off recirculation and runs the AUTO: Turns on the automatic delivery mode...
Page 200: Rear Window Defogger
PASS (Passenger Climate Control): Press to turn the (Outside Air): Press to turn the outside air mode passenger climate control systems on or off. When the on or off. An indicator light comes on to show it is on. passenger climate control system is on, the passenger Air is pulled from outside the vehicle.
Page 201 The heated outside rearview mirrors will turn on to help There is also an interior clear fog or frost from the surface of the mirror when the temperature sensor rear window defogger is on. located next to the steering wheel that Notice: Do not use a razor blade or sharp object measures the temperature to clear the inside rear window.
Page 202: Outlet Adjustment
In order to prevent false temperature readings at Operation Tips startup, the displayed temperature will not change until Clear away any ice, snow or leaves from the air the following occurs: inlets at the base of the windshield that may block Vehicle speed is above 16 km/h (10 mph) for the flow of air into your vehicle.
Page 203 To adjust the rear climate control system, the rear passenger can select a different temperature, mode or fan speed. Whenever the rear passengers have adjusted settings on the rear climate control system, the AUX light is lit on the front climate control system. When the front climate control system is turned off or in defrost mode, the rear climate control system is turned off.
Page 204: Passenger Compartment Air Filter
Manual Operation Passenger Compartment Air Filter « A ª (Fan Control): Press to increase or The passenger compartment air filter traps most of the decrease the fan speed. pollen from the air entering the vehicle. The filter may « ª need to be changed periodically.
Page 205 To access the passenger compartment air filter: 2. Then, insert a tool behind the push pin located on 1. Use a tool to remove the cover. If the vehicle has the inboard side of the air filter compartment to tabs that allow the cover to be unlatched with your carefully pry the pin out.
Page 206: Warning Lights, Gauges, And Indicators
Warning Lights, Gauges, and Indicators Warning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gauges could prevent injury. Warning lights come on when there might be or there is a problem with one of the vehicle's functions.
Page 207: Instrument Panel Cluster
Instrument Panel Cluster English Shown, Metric Similar 4-45...
Page 208 Speedometer and Odometer Tachometer The speedometer shows the speed in both miles This gauge indicates per hour (mph) and kilometers per hour (km/h). See the engine speed MPH (km) under DIC Operation and Displays on in revolutions per page 4 60 for more information. minute (rpm).
Page 209: Safety Belt Reminders
Safety Belt Reminders Passenger Safety Belt Reminder Light For vehicles equipped with the passenger safety belt Driver Safety Belt Reminder Light reminder light, several seconds after the engine is When the engine is started, a chime sounds for started, a chime sounds for several seconds to remind several seconds to remind a driver to fasten the safety the front passenger to buckle their safety belt.
Page 210: Airbag Readiness Light
Airbag Readiness Light If there is a problem with the airbag system, an airbag Driver Information Center (DIC) message can also The system checks the airbag's electrical system for come on. See DIC Warnings and Messages on possible malfunctions. If the light stays on it indicates page 4 65 for more information.
Page 211: Charging System Light
Then, after several more seconds, the status indicator will light either ON or OFF, or either the on or off WARNING: symbol, to let you know the status of the right front passenger frontal and seat-mounted side impact If the airbag readiness light ever comes on and airbags.
Page 212: Brake System Warning Light
See DIC Warnings and Messages on page 4 65 for When the ignition is on, the brake system warning light more information. This light could indicate that there are also comes on when the parking brake is set. The light problems with a generator drive belt, or that there is an will stay on if the parking brake does not release fully.
Page 213: Antilock Brake System (Abs) Warning Light
Antilock Brake System (ABS) For vehicles with a Driver Information Center (DIC), see DIC Warnings and Messages on page 4 65 for all Warning Light brake related DIC messages. For vehicles with the Traction Control System (TCS) Antilock Brake System Warning Light (ABS), this light comes on briefly when the engine is...
Page 214: Stabilitrak Indicator Light
® StabiliTrak Indicator Light Lane Departure Warning (LDW) Light For vehicles with the For vehicles with the ® StabiliTrak system, this lane departure warning light comes on briefly system, this light briefly while starting the engine. comes on green while starting the vehicle.
Page 215: Engine Coolant Temperature Warning Light
Engine Coolant Temperature Engine Coolant Temperature Gauge Warning Light This gauge shows the engine coolant The engine coolant temperature. temperature warning light comes on when the engine is very hot. This light also comes on briefly when the vehicle is started.
Page 216: Tire Pressure Light
Tire Pressure Light When the Light Flashes First and Then is On Steady For vehicles with a Tire This indicates that there may be a problem with the Tire Pressure Monitoring Pressure Monitor System. The light flashes for about a System, this light comes minute and stays on steady for the remainder of the on briefly when the engine...
Page 217 Malfunctions often are indicated by the system before To prevent more serious damage to the vehicle: any problem is apparent. Being aware of the light can Reduce vehicle speed. prevent more serious damage to the vehicle. This Avoid hard accelerations. system assists the service technician in correctly diagnosing any malfunction.
Page 218: Emissions Inspection And Maintenance Programs
If the vehicle has been driven through a deep Emissions Inspection and Maintenance puddle of water, the vehicle's electrical system Programs might be wet. The condition is usually corrected when the electrical system dries out. A few driving Some state/provincial and local governments may have trips should turn the light off.
Page 219: Maintenance Schedule
the critical emission control systems have not been Notice: Lack of proper engine oil maintenance completely diagnosed by the system. This can can damage the engine. The repairs would not be happen if the battery has recently been replaced or covered by the vehicle warranty.
Page 220: Front Fog Lamp Light
Front Fog Lamp Light Cruise Control Light The fog lamp light comes This light comes on on when the fog lamps whenever the cruise are in use. control is set. The light goes out when the fog lamps are turned off. The light goes out when the cruise control is turned off.
Page 221: Fuel Gauge
It takes a little more or less fuel to fill the tank than Fuel Gauge the gauge indicated. For example, the gauge may have indicated that the tank was half full, but it The fuel gauge shows actually took a little more or less than half the approximately how much tank's capacity to fill the tank.
Page 222: Dic Operation And Displays
DIC Operation and Displays Menu Up/Down: Press this button to scroll up and down the menu items. The Driver Information Trip/Fuel Display Menu Items Center (DIC) has different displays which can be (Trip/Fuel): The following display menu items can accessed by pressing the be displayed by pressing the trip/fuel button: DIC buttons located on the instrument panel, to...
Page 223 Once the range drops below an estimated 64 km TIMER ON/OFF (40 miles) remaining, the display will show FUEL This display can be used like a stopwatch. You can RANGE LOW. record the time it takes to travel from one point to If your vehicle is low on fuel, the FUEL LEVEL LOW another.
Page 224: Maintenance Schedule
BATTERY VOLTAGE Vehicle Information Display Menu Items This display shows the current battery voltage. If the (Vehicle Information): The following display voltage is in the normal range, the value will display. For menu items can be displayed by pressing the vehicle example, the display may read BATTERY VOLTAGE information button: 13.2 VOLTS.
Page 225: Parking Assist
UNITS SIDE BLIND ZONE ALERT This display allows you to select between English or If your vehicle has the Side Blind Zone Alert (SBZA) Metric units of measurement. Once in this display, press system, this display allows the system to be turned on the set/reset button to select between ENGLISH or or off.
Page 226: Speed Alert
If a low tire pressure condition is detected by the SPEED ALERT system while driving, a message advising you to add This display will allow you to customize the speed alert air to a specific tire will appear in the display. See warning.
Page 227: Dic Warnings And Messages
4. To match additional transmitters at this time, AUTOMATIC LIGHT CONTROL OFF repeat Step 3. This message displays when the automatic headlamps Each vehicle can have a maximum of are turned off. See Exterior Lamps on page 4 25 for eight transmitters matched to it.
Page 228 CHANGE ENGINE OIL SOON You can receive more than one tire pressure message at a time. To read the other messages that may have This message displays when service is required for been sent at the same time, press the set/reset button. your vehicle.
Page 229 DRIVER DOOR OPEN If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid This symbol appears with damage to the engine. this message. ENGINE OVERHEATED IDLE ENGINE Notice: If you drive your vehicle while the engine is overheating, severe engine damage may occur.
Page 230: Engine Overheated Stop Engine
ENGINE OVERHEATED STOP ENGINE time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but Notice: If you drive your vehicle while the engine is acceleration and speed may be reduced. Anytime this overheating, severe engine damage may occur.
Page 231: Fuel Level Low
FUEL LEVEL LOW ICE POSSIBLE DRIVE WITH CARE This message displays when the outside temperature is This symbol appears with cold enough to create icy road conditions. Adjust your this message. driving accordingly. LANE DEPARTURE SYSTEM UNAVAILABLE If your vehicle has the Lane Departure Warning (LDW) system, this message may display if the LDW system does not activate due to a temporary condition.
Page 232: Oil Pressure Low Stop Engine
NO CRUISE BRAKING GAS PEDAL A multiple chime sounds when this message is displayed. See Engine Oil on page 6 15 for more APPLIED information. This message displays when the Adaptive Cruise Stop the vehicle immediately, as engine damage can Control (ACC) is engaged and you are pressing the result from driving a vehicle with low oil pressure.
Page 233 PASSENGER DOOR OPEN REMOTE KEY LEARNING ACTIVE This message displays while you are matching a This symbol appears with Remote Keyless Entry (RKE) transmitter to your this message. vehicle. See Matching Transmitter(s) to Your Vehicle under Remote Keyless Entry (RKE) System Operation on page 3 4 and DIC Operation and Displays on page 4 60 for more information.
Page 234: Service Air Bag
SERVICE AIR BAG SERVICE BRAKE ASSIST This message displays when there is a problem with This message displays if there is a problem with the the airbag system. Have your vehicle serviced by your brake system. The brake system warning light and dealer immediately.
Page 235 SERVICE PARKING ASSIST SERVICE SIDE BLIND ZONE ALERT SYSTEM If your vehicle has the Ultrasonic Front and Rear Parking Assist (UFRPA) system, this message displays If your vehicle has the Side Blind Zone Alert (SBZA) if there is a problem with the UFRPA system. Do not system and this message displays, both SBZA displays use this system to help you park.
Page 236: Service Transmission
SERVICE SUSPENSION SYS (System) SERVICE TRACTION CONTROL This message displays when the magnetic ride control This message displays when there is a problem with the or automatic leveling control system is not operating Traction Control System (TCS). When this message is properly.
Page 237 SIDE BLIND ZONE ALERT SPEED LIMIT XXX MPH (km/h) SYSTEM OFF This message displays when the Speed Alert has been turned on through the DIC Information Menu If your vehicle has the Side Blind Zone Alert (SBZA) and the vehicle is at or above the speed limit. See DIC system, this message displays when the SBZA system Operation and Displays on page 4 60 for more has been turned off.
Page 238: Theft Attempted
THEFT ATTEMPTED See Tire Inspection and Rotation on page 6 65, Tire Pressure Monitor System on page 6 60, and This symbol appears with Inflation - Tire Pressure on page 6 57 for more this message. information. TRACTION CONTROL OFF This message displays when the Traction Control System (TCS) is turned off.
Page 239: Trunk Open
This message displays when the transmission fluid in WASHER FLUID LOW ADD FLUID your vehicle is too hot. Stop the vehicle and allow it to This symbol appears with idle until the transmission cools down or until this this message. message is removed.
Page 240 The default settings for the customization features were Feature Settings Menu Items set when your vehicle left the factory, but may have The following are customization features that allow you been changed from their default state since then. to program settings to the vehicle: The customization preferences are automatically DISPLAY IN ENGLISH recalled.
Page 241: Auto Door Unlock
ESPANOL: All messages will appear in Spanish. AT VEHICLE SPEED: The doors automatically lock when the vehicle speed is above 5 mph (8 km/h) for JAPANESE: All messages will appear in Japanese. three seconds. ARABIC: All messages will appear in Arabic. NO CHANGE: No change will be made to this feature.
Page 242: Remote Door Lock
DRIVER IN PARK: Only the driver's door will unlock Press the customization button until REMOTE DOOR when the vehicle is shifted into P (Park). LOCK appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then ALL AT KEY OUT: All of the doors will unlock when the press the menu up/down button to scroll through the key is taken out of the ignition.
Page 243: Remote Door Unlock
REMOTE DOOR UNLOCK DELAY DOOR LOCK This feature allows you to select the type of feedback This feature allows you to select whether or not the you will receive when unlocking the vehicle with the locking of the vehicle's doors will be delayed. When Remote Keyless Entry (RKE) transmitter.
Page 244: Exit Lighting
EXIT LIGHTING APPROACH LIGHTING This feature allows you to select the amount of time you This feature allows you to select whether or not to have want the exterior lamps to remain on when it is dark the exterior lights turn on briefly during low light periods enough outside.
Page 245 CHIME VOLUME Press the customization button until PARK TILT MIRRORS appears on the DIC display. Press the This feature allows you to select the volume level of the set/reset button once to access the settings for this chime. feature. Then press the menu up/down button to scroll through the following settings: Press the customization button until CHIME VOLUME appears on the DIC display.
Page 246 EASY EXIT RECALL NO CHANGE: No change will be made to this feature. The current setting will remain. If your vehicle has this feature, it allows you to select To select a setting, press the set/reset button while the your preference for the automatic easy exit seat feature. desired setting is displayed on the DIC.
Page 247: Remote Start
TILT/TELESCOPE: The steering wheel tilt and steering steering feature. See Power Tilt Wheel and Telescopic column telescope features will recall. Steering Column on page 4 4 for more information. See RELEARN REMOTE KEY under DIC Operation ALL (default): The driver's seat and the steering wheel and Displays on page 4 60 for more information on tilt and steering column telescope features will recall, matching transmitters to driver ID numbers.
Page 248: Audio System(S)
DO NOT RESTORE: The customization features will Audio System(s) not be set to their factory default settings. Determine which radio the vehicle has and read the To select a setting, press the set/reset button while the following pages to become familiar with its features. desired setting is displayed on the DIC.
Page 249: Setting The Clock
Notice: Contact your dealer before adding any Enabling/Disabling the Digital Radio equipment. Clock Adding audio or communication equipment could For the Single CD Player interfere with the operation of the vehicle's engine, radio, or other systems, and could damage them. To turn the radio clock display on or off: Follow federal rules covering mobile radio and 1.
Page 250: Setting The Time And Date
The radio clock and analog clock are not synchronized. If the radio clock display is turned off, the screen Occasionally you might need to set the digital radio displays Radio Clock OFF for 10 seconds. The clock using the procedure below to synchronize both menus for clock and date settings are removed, clocks.
Page 251: Changing The Time And Date Default Setting
For a Six-Disc CD Player Changing the Time and Date Default Setting This type of radio has a MENU button for setting the time and date. To set the time and date: For the Single CD Player 1. Turn the radio on. To change the time and date default setting: 2.
Page 252: Radio(S)
For the Six-Disc CD Player Radio(s) To change the time and date default setting: 1. Change the time default setting from 12 hour to 24 hour or the date default setting from month/day/ year to day/month/year, by pressing the MENU button.
Page 253: Playing The Radio
® ® Playing the Radio AudioPilot : If the vehicle has the Bose audio system, it has AudioPilot noise compensation (Power/Volume): Press to turn the system on technology. and off. To use AudioPilot: Turn to increase or decrease the volume. 1.
Page 254: Finding A Station
Finding a Station Storing a Radio Station as a Favorite BAND: Press to switch between AM, FM, or XM . The Drivers are encouraged to set up their radio station selection displays. favorites while the vehicle is in P (Park). Tune to favorite stations using the presets, favorites button, (Tune): Turn to select radio stations.
Page 255 The number of favorites pages can be setup using the To quickly adjust bass, midrange, or treble to the middle MENU button. To setup the number of favorites pages: position, press the pushbutton positioned under the BASS, MID, or TREB label for more than two seconds. 1.
Page 256: Adjusting The Speakers (Balance/Fade)
For the Bose amplified radio, perform the following To quickly adjust balance or fade to the middle position, steps to setup the equalization settings: press the pushbutton positioned under the BAL or FADE label for more than two seconds. A beep sounds 1.
Page 257 ® Surround (Centerpoint ): Select this screen 3. Turn the knob, press the pushbuttons below the ® button to enable Bose Centerpoint signal displayed right or left arrows, or press either SEEK processing circuitry. Centerpoint produces a full arrow to go to the previous or the next XM station vehicle surround sound listening experience from a within the selected category.
Page 258: Radio Message
The CAT button also toggles between compressed and Playing a CD (Single CD Player) uncompressed audio when a mixed disc is present. See Insert a CD partway into the slot, label side up. The Compressed Audio later in this section. player pulls it in and the CD should begin playing.
Page 259 If the surface of a CD is soiled, take a soft, lint free Playing a CD(s) (Six-Disc CD Player) cloth or dampen a clean, soft cloth in a mild, neutral LOAD : Press to load CDs into the CD player. The detergent solution mixed with water, and clean it.
Page 260 © ¨ RDM (Random) (Radio with Six-Disc CD Player): SEEK : Press the left arrow to go to the start of the With the random setting, CD tracks can be played in current track, if more than ten seconds have played. random, rather than sequential order, on one CD or all Press the right arrow to go to the next track.
Page 261: Using The Auxiliary Input Jack
The air is very humid. If so, wait about an hour and CD/AUX (CD/Auxiliary): Press to play a CD when try again. listening to the radio. The CD icon and track number displays when a CD is in the player. Press again and There could have been a problem while burning the system automatically searches for an auxiliary input the CD.
Page 262: Using An Mp3
To use a portable audio player, connect a 3.5 mm Using an MP3 (1/8 inch) cable to the radio's front auxiliary input MP3/WMA CD-R or CD-RW Disc jack. When connecting an auxiliary device, the radio automatically detects the device and Aux Input Device The radio plays MP3 and WMA files that were recorded displays.
Page 263 The CD player is able to read and play a maximum Playlists can be changed by using the of 50 folders, 50 playlists, and 255 files. folder buttons, the knob, or the SEEK arrows. An MP3/WMA CD-R or CD-RW Create a folder structure that makes it easy to find that was recorded using no file folders can also be songs while driving.
Page 264 Play begins from the first track in the first folder No Folder and continues sequentially through all tracks in When the CD contains only compressed files, the files each folder. When the last track of the last folder are located under the root folder. The next and previous has played, play continues from the first track of folder functions do not display on a CD that was the first folder.
Page 265: Playing An Mp3/Wma
Preprogrammed Playlists (Eject): Press this button to eject CD-R(s) or CD-RW(s). To eject the CD-R or CD-RW that is Preprogrammed playlists that were created using currently playing, press and release this button. A beep WinAmp , MusicMatch , or Real Jukebox software sounds and Ejecting Disc displays.
Page 266 REV (Fast Reverse): Press and hold to reverse (Music Navigator): Use the music navigator playback quickly within an MP3/WMA file. Sound is feature to play MP3/WMA files on the CD-R or CD-RW heard at a reduced volume. Release this button to in order by artist or album.
Page 267: Xm Radio Messages
To change from playback by artist to playback by XM Radio Messages album, press the pushbutton located below the Sort XL (Explicit Language Channels): These channels, By label. From the sort screen, push one of the or any others, can be blocked at a customer's buttons below the album button.
Page 268: Navigation/Radio System
No Artist Info: No artist information is available at this XM Radio ID: If tuned to channel 0, this message time on this channel. The system is working properly. alternates with the XM Radio 8 digit radio ID label. This label is needed to activate the service. No Title Info: No song title information is available at this time on this channel.
Page 269: Bluetooth
® Bluetooth Audio System When using the in vehicle Bluetooth system, sound Vehicles with a Bluetooth system can use a Bluetooth comes through the vehicle's front audio system capable cell phone with a Hands Free Profile to make speakers and overrides the audio system. Use the and receive phone calls.
Page 270: Pairing A Phone
Pairing Pairing a Phone A Bluetooth cell phone must be paired to the Bluetooth 1. Press and hold for two seconds. system and then connected to the vehicle before it can 2. Say Bluetooth . be used. See your cell phone manufacturers user guide 3.
Page 271: Storing And Deleting Phone Numbers
Listing All Paired and Connected Phones Connecting to a Different Phone The system can list all cell phones paired to it. If a To connect to a different cell phone, the Bluetooth paired cell phone is also connected to the vehicle, system looks for the next available cell phone in the the system responds with is connected after that order in which all the available cell phones were paired.
Page 272 Delete: This command is used to delete individual 3. Say each digit, one at a time, that you want to name tags. store. After each digit is entered, the system repeats back the digit it heard followed by a tone. Delete All Name Tags: This command deletes all After the last digit has been entered, say Store , stored name tags in the Hands Free Calling Directory...
Page 273: Making A Call
Listing Stored Numbers Using the Dial or Call Command The list command will list all the stored numbers and 1. Press and hold for two seconds. name tags. 2. Say Dial or Call . Using the List Command 3. Say the entire number without pausing or say the name tag.
Page 274: Receiving A Call
Using the Re dial Command Three Way Calling Three way calling must be supported on the cell phone 1. Press and hold for two seconds. and enabled by the wireless service carrier. 2. After the tone, say Re dial . 1.
Page 275: Transferring A Call
Transferring a Call Voice Pass-Thru Audio can be transferred between the Bluetooth system Voice pass thru allows access to the voice recognition and the cell phone. commands on the cell phone. See your cell phone manufacturers user guide to see if the cell phone The cell phone must be paired and connected with the supports this feature.
Page 276: Theft-Deterrent Feature
Sending a Number or Name Tag During Theft-Deterrent Feature a Call ® THEFTLOCK is designed to discourage theft of the vehicle's radio by learning a portion of the Vehicle 1. Press . The system responds Ready , Identification Number (VIN). The radio does not operate followed by a tone.
Page 277: Radio Reception
Radio Reception (Mute/Push to Talk): Press to silence the vehicle speakers only. Press again to turn the sound on. Frequency interference and static can occur during ® For vehicles with Bluetooth or OnStar systems press normal radio reception if items such as cell phone and hold for longer than two seconds to interact with chargers, vehicle convenience accessories, and ®...
Page 278: Backglass Antenna
Satellite Radio Service If a cellular telephone antenna needs to be attached to the glass, make sure that the grid lines for the AM-FM XM Satellite Radio Service gives digital radio reception antenna are not damaged. There is enough space from coast-to-coast in the 48 contiguous United States, between the grid lines to attach a cellular telephone and in Canada.
Page 279: Driving Your Vehicle
Section 5 Driving Your Vehicle Your Driving, the Road, and the Vehicle ..5-2 Driving at Night ....... . 5-12 Defensive Driving .
Page 280: Your Driving, The Road, And The Vehicle
Your Driving, the Road, and the Drunk Driving Vehicle WARNING: Defensive Driving Drinking and then driving is very dangerous. Defensive driving means always expect the Your reflexes, perceptions, attentiveness, and unexpected. The first step in driving defensively is to judgment can be affected by even a small amount wear your safety belt See Safety Belts: They Are for Everyone on page 2 11.
Page 281: Control Of A Vehicle
For persons under 21, it is against the law in every Braking U.S. state to drink alcohol. There are good medical, See Brake System Warning Light on page 4 50. psychological, and developmental reasons for these laws. Braking action involves perception time and reaction time.
Page 282: Antilock Brake System (Abs)
Avoid needless heavy braking. Some people drive in Antilock Brake System (ABS) spurts, heavy acceleration followed by heavy braking, This vehicle has the Antilock Brake System (ABS), an rather than keeping pace with traffic. This is a mistake. advanced electronic braking system that helps prevent The brakes might not have time to cool between hard a braking skid.
Page 283: Brake Assist
ABS can change the brake pressure to each wheel, as Braking in Emergencies required, faster than any driver could. This can help the ABS allows the driver to steer and brake at the same driver steer around the obstacle while braking hard. time.
Page 284: Stabilitrak System
® StabiliTrak System The TCS/StabiliTrak warning light on the instrument panel cluster will flash when the system is operating. The vehicle may have the StabiliTrak system which See Traction Control System (TCS) Warning Light on ® combines antilock brake, traction and stability control page 4 51 and StabiliTrak Indicator Light on systems and helps the driver maintain directional...
Page 285 ® The TCS and StabiliTrak To turn the system off or light will flash when the on, press and release this system is limiting button located in front of wheel spin. the shift lever. The system may be heard or felt while it is working, but TCS automatically comes on whenever the vehicle is this is normal.
Page 286: Power Steering
Adding non dealer accessories can affect the vehicle's Steering performance. See Accessories and Modifications on Power Steering page 6 3 for more information. If power steering assist is lost because the engine stops Magnetic Ride Control or the system is not functioning, the vehicle can be steered but it will take more effort.
Page 287: Steering In Emergencies
Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
Page 288: Off-Road Recovery
Off-Road Recovery Passing The vehicle's right wheels can drop off the edge of a Passing another vehicle on a two-lane road can be road onto the shoulder while driving. dangerous. To reduce the risk of danger while passing: Look down the road, to the sides, and to crossroads for situations that might affect a successful pass.
Page 289 ® Skidding If the vehicle has StabiliTrak , the system may be ® active. See StabiliTrak System on page 5 6. In a skid, a driver can lose control of the vehicle. Of course, traction is reduced when water, snow, ice, Defensive drivers avoid most skids by taking gravel, or other material is on the road.
Page 290: Driving At Night
Driving at Night Driving in Rain and on Wet Roads Night driving is more dangerous than day driving Rain and wet roads can reduce vehicle traction and because some drivers are likely to be impaired affect your ability to stop and accelerate. Always drive alcohol or drugs, with night vision problems, or by slower in these types of driving conditions and avoid fatigue.
Page 291: Before Leaving On A Long Trip
Hydroplaning Before Leaving on a Long Trip Hydroplaning is dangerous. Water can build up under To prepare your vehicle for a long trip, consider having your vehicle's tires so they actually ride on the water. it serviced by your dealer before departing. This can happen if the road is wet enough and you are Things to check on your own include: going fast enough.
Page 292: Highway Hypnosis
Highway Hypnosis WARNING: Always be alert and pay attention to your surroundings while driving. If you become tired or sleepy, find a safe place to park your vehicle and rest. If you do not shift down, the brakes could get so hot that they would not work well.
Page 293: Winter Driving
Stay in your own lane. Do not swing wide or cut Try not to break the fragile traction. If you accelerate too across the center of the road. Drive at speeds that fast, the drive wheels will spin and polish the surface let you stay in your own lane.
Page 294 Blizzard Conditions WARNING: (Continued) Being stuck in snow can be in a serious situation. Stay with the vehicle unless there is help nearby. If possible, use the Roadside Service on page 8 7. To get help Open a window about 5 cm (two inches) on and keep everyone in the vehicle safe: the side of the vehicle that is away from the wind to bring in fresh air.
Page 295: Rocking Your Vehicle To Get It Out
Repeat this until help arrives but only when you feel really uncomfortable from the cold. Moving about to WARNING: keep warm also helps. If it takes some time for help to arrive, now and then If the vehicle's tires spin at high speed, they can when you run the engine, push the accelerator pedal explode, and you or others could be injured.
Page 296: Loading The Vehicle
Loading the Vehicle Tire and Loading Information Label It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory installed options.
Page 297 The Tire and Loading Information label also Steps for Determining Correct Load Limit shows the tire size of the original equipment Locate the statement The combined weight tires (C) and the recommended cold tire inflation of occupants and cargo should never exceed pressures (D).
Page 298 Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. If your vehicle will be towing a trailer, the load from your trailer will be transferred to your vehicle.
Page 299 Example 2 Example 3 Item Description Total Item Description Total Vehicle Capacity Vehicle Capacity 1,000 lbs 1,000 lbs Weight for Weight for (453 kg) (453 kg) Example 2 = Example 3 = Subtract Occupant Subtract Occupant 1,000 lbs Weight @ 150 lbs 750 lbs (340 kg) Weight @ 200 lbs (453 kg)
Page 300 Refer to your vehicle's Tire and Loading The GVWR includes the weight of the vehicle, all Information label for specific information about occupants, fuel, and cargo. Never exceed the your vehicle's capacity weight and seating GVWR for your vehicle, or the Gross Axle Weight positions.
Page 301 WARNING: WARNING: Do not load the vehicle any heavier than Things you put inside your vehicle can strike the Gross Vehicle Weight Rating (GVWR), and injure people in a sudden stop or turn, or either the maximum front or rear Gross or in a crash.
Page 302: Towing
Automatic Level Control Towing This feature keeps the rear of your vehicle level Towing Your Vehicle as the load changes. It is automatic, you do not need to adjust anything. Consult your dealer or a professional towing service if the disabled vehicle must be towed. See Roadside This type of level control is fully automatic and will Service on page 8 7.
Page 303: Dinghy Towing
Here are some important things to consider before Dinghy Towing recreational vehicle towing: What's the towing capacity of the towing vehicle? Be sure to read the tow vehicle manufacturer's recommendations. How far will the vehicle be towed? Some vehicles have restrictions on how far and how long they can tow.
Page 304: Towing A Trailer
6. Secure the vehicle to the dolly. 7. Release the parking brake. Towing a Trailer The Cadillac Professional Vehicle cannot tow a trailer. WARNING: The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly.
Page 305: Pulling A Trailer
Pulling a trailer improperly can damage the Pulling A Trailer vehicle and result in costly repairs not covered by Here are some important points: the vehicle warranty. To pull a trailer correctly, follow the advice in this section and see your dealer There are many different laws, including speed for important information about towing a trailer with limit restrictions, having to do with trailering.
Page 306: Weight Of The Trailer Tongue
Do not tow a trailer when the outside temperature Maximum trailer weight is calculated assuming only the is above 100°F (38°C). driver is in the tow vehicle and it has all the required trailering equipment. The weight of additional optional If the vehicle has the Side Blind Zone Alert (SBZA) equipment, passengers and cargo in the tow vehicle system and it doesn't seem to be working properly...
Page 307: Safety Chains
Hitches It is important to have the correct hitch equipment. Crosswinds, large trucks going by and rough roads are a few reasons why the right hitch is needed. Here are some rules to follow: The rear bumper on the vehicle is not intended for hitches.
Page 308: Driving With A Trailer
Follow the manufacturer's recommendation for attaching During the trip, check occasionally to be sure that the safety chains and do not attach them to the bumper. load is secure, and that the lamps and any trailer Always leave just enough slack so the rig can turn. brakes are still working.
Page 309: Turn Signals When Towing A Trailer
When turning with a trailer, make wider turns than Reduce speed and shift to a lower gear before starting normal. Do this so the trailer will not strike soft down a long or steep downgrade. If the transmission is shoulders, curbs, road signs, trees or other objects. not shifted down, the brakes might have to be used so Avoid jerky or sudden maneuvers.
Page 310: Maintenance When Trailer Towing
3. When the wheel chocks are in place, release the Maintenance When Trailer Towing brake pedal until the chocks absorb the load. The vehicle needs service more often when pulling a 4. Reapply the brake pedal. Then apply the parking trailer.
Page 311: Service And Appearance Care
Section 6 Service and Appearance Care Service ..........6-3 Overheated Engine Protection Accessories and Modifications .
Page 312 Section 6 Service and Appearance Care Tire Chains ........6-73 Finish Care .
Page 313: Service
Service Accessories and Modifications When non dealer accessories are added to the vehicle, For service and parts needs, visit your dealer. You they can affect vehicle performance and safety, will receive genuine GM parts and GM-trained and including such things as airbags, braking, stability, ride supported service people.
Page 314: California Proposition 65 Warning
California Proposition 65 Warning Doing Your Own Service Work Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to WARNING: cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems, many fluids, and some component wear by-products contain You can be injured and the vehicle could be and/or emit these chemicals.
Page 315: Adding Equipment To The Outside Of The
This vehicle has an airbag system. Before attempting to do your own service work, see Servicing Your Airbag-Equipped Vehicle on page 2 68. Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Record on page 7 12.
Page 316: Gasoline Specifications
Otherwise, you could damage the engine. If heavy See Malfunction Indicator Lamp on page 4 54. If this knocking is heard when using gasoline rated occurs, return to your authorized dealer for diagnosis. at 87 octane or higher, the engine needs service. If it is determined that the condition is caused by the type of fuel used, repairs might not be covered by the Gasoline Specifications...
Page 317: Fuels In Foreign Countries
Also, your dealer has additives that will help correct and Some gasolines that are not reformulated for low prevent most deposit related problems. emissions can contain an octane-enhancing additive called methylcyclopentadienyl manganese tricarbonyl Gasolines containing oxygenates, such as ethers and (MMT);...
Page 318: Filling The Tank
Filling the Tank WARNING: Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the fuel pump island. Turn off the engine when refueling.
Page 319 While refueling, hang the tethered fuel cap from the hook on the fuel door. WARNING: Fuel can spray out on you if you open the fuel cap too quickly. If you spill fuel and then something ignites it, you could be badly burned. This spray can happen if the tank is nearly full, and is more likely in hot weather.
Page 320 When replacing the fuel cap, turn it clockwise until it clicks. Make sure the cap is fully installed. The WARNING: diagnostic system can determine if the fuel cap has been left off or improperly installed. This would allow If a fire starts while you are refueling, do not fuel to evaporate into the atmosphere.
Page 321: Filling A Portable Fuel Container
Filling a Portable Fuel Container WARNING: (Continued) WARNING: Bring the fill nozzle in contact with the inside of the fill opening before operating the nozzle. Never fill a portable fuel container while it is in Contact should be maintained until the filling is the vehicle.
Page 322: Checking Things Under The Hood
Checking Things Under WARNING: the Hood Things that burn can get on hot engine parts and WARNING: start a fire. These include liquids like fuel, oil, coolant, brake fluid, windshield washer and other fluids, and plastic or rubber. You or others could An electric fan under the hood can start up and be burned.
Page 323: Hood Release
Hood Release To lift the hood: 1. Pull the hood release lever with this symbol on it. It is located on the lower left side of the instrument panel. 2. Then go to the front of the vehicle and find the secondary hood release lever, located near the center of the hood.
Page 324: Engine Compartment Overview
Engine Compartment Overview When you open the hood, here is what you will see: 4.6L L37 Engine shown, 4.6L LD8 Engine similar 6-14...
Page 325: Engine Oil
A. Underhood Fuse Block on page 6 104. Engine Oil B. Remote Positive (+) Terminal. See Jump Starting To ensure proper engine performance and long life, on page 6 38. careful attention must be paid to engine oil. Following C. Windshield Washer Fluid Reservoir. See Adding these simple, but important steps will help protect your Washer Fluid under Windshield Washer Fluid on investment:...
Page 326: When To Add Engine Oil
Obtaining an accurate oil level reading is essential: Notice: Do not add too much oil. Oil levels above or below the acceptable operating range shown on the 1. If the engine has been running recently, turn off dipstick are harmful to the engine. If you find that the engine and allow several minutes for the oil to you have an oil level above the operating range, drain back into the oil pan.
Page 327 Viscosity Grade SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W 30, 10W 40, or 20W-50. Your vehicle was filled at the factory with dexos approved engine oil. Notice: Use only engine oil that is approved to the dexos specification or an equivalent engine oil of the appropriate viscosity grade.
Page 328: Engine Oil Life System
When selecting an oil of the appropriate viscosity grade, Engine Oil Life System be sure to always select an oil that meets the required When to Change Engine Oil specification, dexos . See Specification for more information. This vehicle has a computer system that indicates when Engine Oil Additives/Engine Oil Flushes to change the engine oil and filter.
Page 329: Engine Air Cleaner/Filter
How to Reset the Engine Oil Life Engine Air Cleaner/Filter System See Engine Compartment Overview on page 6 14 for the location of the engine air cleaner/filter. Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil When to Inspect the Engine Air change.
Page 330 To inspect or replace the filter: To reinstall the cover: 1. Align the two hinges located on the inboard side of the cover. 2. Push the cover slightly down and towards the engine to engage the tabs in the hinges and align the two screws.
Page 331: Automatic Transmission Fluid
Automatic Transmission Fluid Notice: Too much or too little fluid can damage the transmission. Too much can mean that some of the When to Check and Change Automatic fluid could come out and fall on hot engine parts or exhaust system parts, starting a fire. Too little Transmission Fluid fluid could cause the transmission to overheat.
Page 332: Checking The Fluid Level
Checking the Fluid Level Then, without shutting off the engine, follow these steps: Prepare the vehicle as follows: 1. Locate the transmission fluid cap which is located 1. Park the vehicle on a level place. Keep the engine next to the radiator hose and below the engine air running.
Page 333: How To Add Automatic Transmission Fluid
If the fluid level is low, add only enough of the proper fluid to bring the level into the cross-hatched area on the dipstick. 1. Pull out the dipstick. 2. Using a long-neck funnel, add enough fluid at the dipstick hole to bring it to the proper level. It does not take much fluid, generally less than one pint (0.5 L).
Page 334: Cooling System
Cooling System The cooling system allows the engine to maintain the correct working temperature. 4.6L L37 Engine shown, 4.6L LD8 Engine similar 6-24...
Page 335 A. Coolant Surge Tank with Pressure Cap WARNING: (Continued) B. Electric Engine Cooling Fans WARNING: Do not run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned. An electric engine cooling fan under the hood can Get any leak fixed before you drive the vehicle.
Page 336: Engine Coolant
Engine Coolant Use a 50/50 mixture of clean, drinkable water and ® DEX-COOL coolant. If using this mixture, nothing else The cooling system in the vehicle is filled with needs to be added. This mixture: ® DEX-COOL engine coolant. This coolant is designed Gives freezing protection down to 34°F ( 37°C), to remain in the vehicle for five years or 150,000 miles outside temperature.
Page 337: Checking Coolant
Checking Coolant How to Add Coolant to the Surge Tank The vehicle must be on a level surface when checking the coolant level. WARNING: Check to see if coolant is visible in the coolant recovery tank. If the coolant inside the coolant recovery tank is You can be burned if you spill coolant on hot boiling, do not do anything else until it cools down.
Page 338 Turn the pressure cap slowly counterclockwise. WARNING: If you hear a hiss, wait for that to stop. A hiss means there is still some pressure left. 2. Keep turning the cap and remove it. Steam and scalding liquids from a hot cooling 3.
Page 339: Engine Overheating
Notice: If the pressure cap is not tightly installed, coolant loss and possible engine damage may occur. Be sure the cap is properly and tightly secured. ® If coolant is needed, add the proper DEX-COOL coolant mixture at the coolant recovery tank. Engine Overheating The vehicle has several indicators to warn of engine overheating.
Page 340 Then check to see if the engine cooling fans are running. If the engine is overheating, both fans should WARNING: (Continued) be running. If they are not, do not continue to run the engine and have the vehicle serviced. If you keep driving when the vehicles engine is Notice: Engine damage from running the engine overheated, the liquids in it can catch fire.
Page 341: Overheated Engine Protection
If the overheat warning is displayed with no sign of Overheated Engine Protection steam: Operating Mode 1. Turn the air conditioning off. If an overheated engine condition exists and the 2. Turn the heater on to the highest temperature and message ENGINE OVERHEATED STOP ENGINE to the highest fan speed.
Page 342: Power Steering Fluid
Power Steering Fluid 4. Replace the cap and completely tighten it. 5. Remove the cap again and look at the fluid level The power steering fluid on the dipstick. reservoir is located next to The level should be at the FULL COLD mark. the underhood fuse block If necessary, add only enough fluid to bring the level on the passenger side of...
Page 343: Brakes
Do not use engine coolant (antifreeze) in the Adding Washer Fluid windshield washer. It can damage the The WASHER FLUID LOW ADD FLUID message will windshield washer system and paint. be displayed on the Driver Information Center (DIC) when the fluid is low. See DIC Warnings and Messages Brakes on page 4 65 for more information.
Page 344 Do not top off the brake fluid. Adding fluid does not correct a leak. If fluid is added when the linings are WARNING: worn, there will be too much fluid when new brake linings are installed. Add or remove brake fluid, as With the wrong kind of fluid in the brake hydraulic necessary, only when work is done on the brake hydraulic system.
Page 345: Brake Adjustment
Brake Wear Properly torqued wheel nuts are necessary to help prevent brake pulsation. When tires are rotated, inspect This vehicle has disc brakes. Disc brake pads have brake pads for wear and evenly tighten wheel nuts built-in wear indicators that make a high-pitched in the proper sequence to torque specifications in warning sound when the brake pads are worn and new Capacities and Specifications on page 6 112.
Page 346: Battery
Replacing Brake System Parts Battery The braking system on a vehicle is complex. Its many Refer to the replacement number on the original battery parts have to be of top quality and work well together if label when a new battery is needed. the vehicle is to have really good braking.
Page 347: Vehicle Storage
To be sure the vent hose (A) is properly attached, the WARNING: (Continued) vent hose connectors (B) must be securely reattached to the vent outlets (C) on each side of the battery and the vent assembly grommet (D) must be secured to the provide the protection needed in a crash.
Page 348: Jump Starting
Jump Starting Notice: Ignoring these steps could result in costly damage to the vehicle that would not be covered by For more information about the vehicle battery, see the warranty. Battery on page 6 36. Trying to start the vehicle by pushing or pulling it If the vehicle's battery has run down, you may want to will not work, and it could damage the vehicle.
Page 349 Notice: If you leave the radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by the warranty. Always turn off the radio and other accessories when jump starting the vehicle. 3.
Page 350 The remote negative ( ) terminal is located behind the power steering pulley, near the engine cover. WARNING: It is marked GND ( ). You will not see the battery of your vehicle under Using an open flame near a battery can cause the hood.
Page 351 6. Connect the red positive (+) cable to the remote WARNING: positive (+) terminal location on the vehicle with the dead battery. Use a remote positive (+) terminal if the vehicle has one. Fans or other moving engine parts can injure you 7.
Page 352 9. Connect the other end of the negative ( ) cable to the negative ( ) terminal location on the vehicle with the dead battery. Your vehicle has a remote negative ( ) terminal marked GND ( ). 10. Now start the vehicle with the good battery and run the engine for a while.
Page 353: Headlamp Aiming
To disconnect the jumper cables from both vehicles, do It is recommended that the vehicle is taken to your the following: dealer for service if the headlamps need to be re-aimed. It is possible however, to re-aim the headlamps as 1.
Page 354 Headlamp aiming is done with the vehicle's low-beam headlamps. The high-beam headlamps will be correctly aimed if the low-beam headlamps are aimed properly. To adjust the vertical aim: 1. Open the hood. See Hood Release on page 6 13 for more information. 4.
Page 355 8. Turn the vertical aiming screw until the headlamp beam is aimed to the horizontal tape line. Turn it clockwise or counterclockwise to raise or lower the angle of the beam. The top edge of the cut-off should be positioned at the bottom edge of the horizontal tape line.
Page 356: Bulb Replacement
Bulb Replacement Windshield Wiper Blade Replacement It is recommended that all bulbs be replaced by your dealer. Windshield wiper blades should be inspected for wear or cracking. See Scheduled Maintenance on page 7 3 High Intensity Discharge (HID) for more information on wiper blade inspection. Lighting Replacement blades come in different types and are removed in different ways.
Page 357 4. Install the new wiper blade onto the wiper arm and firmly press down on the clip to snap it into place. To remove and replace the wiper blade element: 1. The wiper blade element has two notches at one end which are engaged by the bottom claw set of the wiper blade.
Page 358: Tires
Tires WARNING: (Continued) Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever Over inflated tires are more likely to be have questions about your tire warranty and cut, punctured, or broken by a sudden where to obtain service, see your vehicle impact such as when you hit a pothole.
Page 359: Tire Sidewall Labeling
Tire Sidewall Labeling (B) TPC Spec (Tire Performance Criteria Specification) Original equipment tires designed Useful information about a tire is molded into its to GM's specific tire performance criteria have a sidewall. TPC specification code molded onto the sidewall. GM's TPC specifications meet or exceed all federal safety guidelines.
Page 360 (G) Maximum Cold Inflation Load Limit not be driven at speeds over 65 mph (105 km/h). Maximum load that can be carried and the The compact spare tire is for emergency use maximum pressure needed to support that load. when a regular road tire has lost air and gone flat. For information on recommended tire pressure See Spare Tire on page 6 93 and If a Tire Goes see Inflation - Tire Pressure on page 6 57 and...
Page 361 (E) Tire Inflation The temporary use tire or compact spare tire should be inflated to 60 psi (420 kPa). For more information on tire pressure and inflation see Inflation - Tire Pressure on page 6 57 and Spare Tire on page 6 93. (F) Tire Size A combination of letters and numbers define a tire's width, height, aspect ratio,...
Page 362: Tire Size
(B) TPC Spec (Tire Performance Criteria (G) Single Tire Maximum Load Maximum load Specification) Original equipment tires designed that can be carried and the maximum pressure to GM's specific tire performance criteria have a needed to support that load when used as a TPC specification code molded onto the sidewall.
Page 363 (C) Aspect Ratio A two digit number that indicates the tire height to width measurements. For example, if the tire size aspect ratio is 60, as shown in item C of the illustration, it would mean that the tire's sidewall is 60 percent as high as it is wide.
Page 364: Tire Terminology And Definitions
(D) Construction Code A letter code is used to Accessory Weight This means the combined indicate the type of ply construction in the tire. weight of optional accessories. Some examples of The letter R means radial ply construction; the optional accessories are, automatic transmission, letter D means diagonal or bias ply construction;...
Page 365 DOT Markings A code molded into the sidewall Maximum Inflation Pressure The maximum of a tire signifying that the tire is in compliance air pressure to which a cold tire can be inflated. with the U.S. Department of Transportation (DOT) The maximum air pressure is molded onto the motor vehicle safety standards.
Page 366 Passenger (P-Metric) Tire A tire used on Treadwear Indicators Narrow bands, sometimes passenger cars and some light duty trucks and called wear bars, that show across the tread of multipurpose vehicles. a tire when only 1/16 inch (1.6 mm) of tread remains.
Page 367: Inflation - Tire Pressure
Inflation - Tire Pressure A vehicle specific Tire and Loading Information label is attached to your vehicle. This label shows Tires need the correct amount of air pressure to your vehicle's original equipment tires and the operate effectively. correct inflation pressures for your tires when they are cold.
Page 368: How To Check
How to Check Professional Vehicle Use a good quality pocket-type gauge to check The proper inflation of the tires on your tire pressure. You cannot tell if your tires are professional vehicle depends on the type of tires properly inflated simply by looking at them. on it.
Page 369: High-Speed Operation
High-Speed Operation If your vehicle has P235/55R17 or P245/50R18 size tires, and you will be driving at speeds of 100 mph (160 km/h) or higher, where it is legal, set the cold WARNING: inflation pressure to the maximum inflation pressure shown on the tire sidewall, or 38 psi (265 kPa), whichever is lower.
Page 370: Tire Pressure Monitor System
Tire Pressure Monitor System Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to The Tire Pressure Monitor System (TPMS) uses radio maintain correct tire pressure, even if under inflation and sensor technology to check tire pressure levels.
Page 371: Tire Pressure Monitor Operation
Federal Communications Commission If the warning light comes on, stop as soon as possible (FCC) and Industry Canada and inflate the tires to the recommended pressure shown on the tire loading information label. See See Radio Frequency Statement on page 8 18 for Loading the Vehicle on page 5 18.
Page 372: Tpms Malfunction Light And Message
A Tire and Loading Information label, attached to TPMS Malfunction Light and Message your vehicle, shows the size of your vehicle's original The TPMS will not function properly if one or more of equipment tires and the correct inflation pressure for the TPMS sensors are missing or inoperable.
Page 373: Tpms Sensor Matching Process
One or more TPMS sensors are missing or TPMS Sensor Matching Process damaged. The DIC message and the TPMS malfunction light should go off when the TPMS Each TPMS sensor has a unique identification code. sensors are installed and the sensor matching Any time you rotate your vehicle's tires or replace process is performed successfully.
Page 374 The TPMS sensor matching process is outlined below: 6. Proceed to the passenger side front tire, and repeat the procedure in Step 5. 1. Set the parking brake. 7. Proceed to the passenger side rear tire, and repeat 2. Turn the ignition switch to ON/RUN with the the procedure in Step 5.
Page 375: Tire Inspection And Rotation
Tire Inspection and Rotation The purpose of a regular tire rotation is to achieve a uniform wear for all tires on the vehicle. This will We recommend that you regularly inspect your ensure that your vehicle continues to perform vehicle's tires, including the spare tire, for signs of most like it did when the tires were new.
Page 376 Make certain that all wheel nuts are properly tightened. See Wheel Nut Torque under Capacities and Specifications on page 6 112. WARNING: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time.
Page 377: When It Is Time For New Tires
When It Is Time for New Tires The rubber in tires ages over time, even if they are not being used. This is also true for the spare tire, if your Various factors, such as maintenance, temperatures, vehicle has one. Multiple conditions affect how fast this driving speeds, vehicle loading, and road conditions aging takes place, including temperatures, loading influence when you need new tires.
Page 378: Buying New Tires
Buying New Tires WARNING: GM has developed and matched specific tires for your vehicle. The original equipment tires installed on your vehicle, when it was new, were designed to meet Tires could explode during improper service. You General Motors Tire Performance Criteria Specification or others could be injured or killed if you attempt (TPC Spec) system rating.
Page 379 If you must replace your vehicle's tires with those WARNING: (Continued) that do not have a TPC Spec number, make sure they are the same size, load range, speed rating, and construction type (radial and bias belted tires) as your Your vehicle may have a compact spare tire and vehicle's original tires.
Page 380: Different Size Tires And Wheels
Different Size Tires and Wheels Uniform Tire Quality Grading Quality grades can be found where applicable If you add wheels or tires that are a different size than your original equipment wheels and tires, this may on the tire sidewall between tread shoulder and affect the way your vehicle performs, including its maximum section width.
Page 381 All Passenger Car Tires Must Conform to assigned to this tire is based on straight-ahead Federal Safety Requirements In Addition To braking traction tests, and does not include These Grades. acceleration, cornering, hydroplaning, or peak traction characteristics. Treadwear Temperature A, B, C The treadwear grade is a comparative rating based on the wear rate of the tire when tested The temperature grades are A (the highest), B,...
Page 382: Wheel Alignment And Tire Balance
Wheel Alignment and Tire Balance equipment parts. This way, you will be sure to have the right wheel, wheel bolts, wheel nuts, and TPMS sensors The tires and wheels on your vehicle were aligned and for your vehicle. balanced carefully at the factory to give you the longest tire life and best overall performance.
Page 383: Tire Chains
Used Replacement Wheels WARNING: (Continued) WARNING: Use another type of traction device only if its manufacturer recommends it for use on the Putting a used wheel on the vehicle is dangerous. vehicle and tire size combination and road You cannot know how it has been used or how conditions.
Page 384 A rear blowout, particularly on a curve, acts much like a skid and may require the same correction you would WARNING: use in a skid. In any rear blowout remove your foot from the accelerator pedal. Get the vehicle under control by Lifting a vehicle and getting under it to do steering the way you want the vehicle to go.
Page 385: Tire Sealant And Compressor Kit
Tire Sealant and Compressor Kit WARNING: WARNING: Storing the tire sealant and compressor kit or other equipment in the passenger compartment of Idling a vehicle in an enclosed area with poor the vehicle could cause injury. In a sudden stop or ventilation is dangerous.
Page 386: Tire Sealant
Read and follow all of the tire sealant and compressor Tire Sealant kit instructions. Read and follow the safe handling instructions on the The kit includes: label adhered to the compressor. Check the tire sealant expiration date on the sealant canister.
Page 387: Punctured Tire
Using the Tire Sealant and Compressor See If a Tire Goes Flat on page 6 73 for other important safety warnings. Kit to Temporarily Seal and Inflate a Do not remove any objects that have penetrated Punctured Tire the tire. Follow the directions closely for correct sealant usage.
Page 388 7. Start the vehicle. The vehicle must be running Notice: If the recommended pressure cannot be while using the air compressor. reached after approximately 25 minutes, the vehicle should not be driven farther. The tire is too severely 8. Turn the selector switch (B) clockwise to the damaged and the tire sealant and compressor kit Sealant + Air position.
Page 389 19. Stop at a safe location and check the tire pressure. 16. If the flat tire was Refer to Steps 1 through 11 under Using the Tire able to inflate to the Sealant and Compressor Kit without Sealant to recommended inflation Inflate a Tire (Not Punctured).
Page 390: Not Punctured
Using the Tire Sealant and Compressor See If a Tire Goes Flat on page 6 73 for other important safety warnings. Kit without Sealant to Inflate a Tire 1. Remove the tire sealant and compressor kit (Not Punctured) from its storage location. See Tire Sealant and To use the air compressor to inflate a tire with air only Compressor Kit Storage on page 6 82.
Page 391 7. Start the vehicle. The vehicle must be running 11. Press the on/off button (A) to turn the tire sealant while using the air compressor. and compressor kit off. 8. Turn the selector switch (B) counterclockwise to Be careful while handling the tire sealant and the Air Only position.
Page 392: Tire Sealant And Compressor Kit Storage
Removal and Installation of the Sealant Tire Sealant and Compressor Kit Canister Storage To remove the sealant canister: The tire sealant and compressor kit is located in the trunk. 1. Open the trunk. See Trunk on page 3 12. 2. Lift the cover. 1.
Page 393: Changing A Flat Tire
Changing a Flat Tire When the vehicle has a flat tire (B), use the following example as a guide to assist you in the placement of If a tire goes flat, avoid further tire and wheel damage wheel blocks (A). by driving slowly to a level place, well off the road, if possible.
Page 394: Removing The Spare Tire And Tools
Removing the Spare Tire and Tools 3. Grab the handle and remove the cover. The equipment needed is in the trunk. To access the equipment: 1. Open the trunk. See Trunk on page 3 12 for more information. 2. Press the area at the front of the handle located on the cover so that the back edge...
Page 395 The tools to be used are the jack (A) and the wheel 4. Turn the wing nut to remove the retainer that holds wrench (B). the wrench and jack. 5. Remove the wheel wrench, jack and spare tire from the trunk. See Spare Tire on page 6 93 for more information.
Page 396 Removing the Flat Tire and Installing Be careful not to scratch the aluminum wheel edge and do not try to remove it with your hands. Then the Spare Tire loosen the wheel nuts with the wheel wrench. Do not remove them yet. 1.
Page 397 WARNING: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. WARNING: Raising your vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall.
Page 398 6. Raise the jack until the metal flange fits firmly into 8. Raise the vehicle by turning the jack handle the channel of the jack head. clockwise. Raise the vehicle far enough off the ground for the spare tire to fit under the vehicle. 7.
Page 399 11. Place the spare tire on the wheel-mounting 10. Remove any rust or dirt surface. from the wheel bolts, mounting surfaces, and spare wheel. WARNING: Never use oil or grease on bolts or nuts because the nuts might come loose. The vehicle's wheel could fall off, causing a crash.
Page 400 WARNING: Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off. The wheel nuts should be tightened with a torque wrench to the proper torque specification after replacing. Follow the torque specification supplied by the aftermarket manufacturer when using accessory locking wheel nuts.
Page 401: Storing A Flat Or Spare Tire And Tools
Storing a Flat or Spare Tire and Tools WARNING: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.
Page 402 A. Cover B. Wing Nut C. Retainer D. Jack and Wheel Wrench E. Jack Container F. Spare Tire G. Bolt 1. Open the trunk. See Trunk on page 3 12. 2. Reinstall the spare tire (F), face down, making sure to line up the wheel center hole with the bolt (G) and place it on the compartment floor.
Page 403: Spare Tire
Spare Tire After installing the compact spare on the vehicle, stop as soon as possible and make sure the spare tire is Compact Spare Tire correctly inflated. The compact spare is made to perform well at speeds up to 65 mph (105 km/h) for distances up to 3,000 miles (5 000 km), so you can WARNING: finish your trip and have the full-size tire repaired or...
Page 404: Appearance Care
Spare Tire Appearance Care This vehicle may have a spare tire, which, when new, Interior Cleaning was fully inflated. A spare tire may lose air over time, so check its inflation pressure regularly. See Inflation - Tire The vehicle's interior will continue to look its best if it is Pressure on page 6 57 and Loading the Vehicle on cleaned often.
Page 405: Fabric/Carpet
Laundry detergents or dishwashing soaps with Notice: Using abrasive cleaners when cleaning degreasers can leave residue that streaks and glass surfaces on the vehicle, could scratch the attracts dirt. For liquid cleaners, about 20 drops per glass and/or cause damage to the rear window gallon (3.78 L) of water is a good guide.
Page 406 3. Start on the outside edge of the soil and gently rub not recommended. Do not use silicone or wax-based toward the center. Continue cleaning, using a clean products, or those containing organic solvents to area of the cloth each time it becomes soiled. clean the vehicle's interior because they can alter the appearance by increasing the gloss in a non-uniform 4.
Page 407: Wood Panels
Instrument Panel, Vinyl, and Other Speaker Covers Plastic Surfaces Vacuum around a speaker cover gently, so that the speaker will not be damaged. Clean spots with just A soft cloth dampened with water may be used to water and mild soap. remove dust.
Page 408: Washing Your Vehicle
Washing Your Vehicle High pressure car washes may cause water to enter the vehicle. Avoid using high pressure washes closer than The best way to preserve the vehicle's finish is to keep 12 inches (30 cm) to the surface of the vehicle. Use of it clean by washing it often.
Page 409: Windshield And Wiper Blades
Notice: Machine compounding or aggressive Use special care with aluminum trim. To avoid polishing on a basecoat/clearcoat paint finish may damaging protective trim, never use auto or chrome damage it. Use only non-abrasive waxes and polish, steam or caustic soap to clean aluminum. polishes that are made for a basecoat/clearcoat A coating of wax, rubbed to high polish, is paint finish on the vehicle.
Page 410: Aluminum Or Chrome-Plated Wheels
Aluminum or Chrome-Plated Wheels The surface of these wheels is similar to the painted surface of the vehicle. Do not use strong soaps, and Trim chemicals, abrasive polishes, abrasive cleaners, cleaners with acid, or abrasive cleaning brushes on The vehicle may have either aluminum or them because they could damage the surface.
Page 411: Tires
Tires Underbody Maintenance To clean the tires, use a stiff brush with tire cleaner. Chemicals used for ice and snow removal and dust control can collect on the underbody. If these are Notice: Using petroleum-based tire dressing not removed, corrosion and rust can develop on the products on the vehicle may damage the paint finish underbody parts such as fuel lines, frame, floor pan, and/or tires.
Page 412: Vehicle Identification
Vehicle Identification Engine Identification The eighth character in the VIN is the engine code. This Vehicle Identification Number (VIN) code identifies the vehicle's engine, specifications, and replacement parts. See Engine Specifications under Capacities and Specifications on page 6 112 for the vehicle's engine code.
Page 413: Electrical System
Electrical System Headlamp Wiring The headlamp wiring system has four individual fuses. Add-On Electrical Equipment An electrical overload will cause the lamps to go on and off, or in some cases to remain off. If this happens, Notice: Do not add anything electrical to the vehicle have the headlamp wiring checked right away.
Page 414: Power Windows And Other Power Options
Power Windows and Other Power If you ever have a problem on the road and don't have a spare fuse, you can borrow one that has the Options same amperage. Just pick some feature of the vehicle that you can get along without like the radio or Circuit breakers in the fuse block protect the power cigarette lighter...
Page 415 Fuses Usage Fuses Usage Engine Control Module (ECM), Crank Air Injection Reactor (AIR) Solenoid Fuel Injectors Odd Oxygen Sensor Fuel Injectors Even Emission Device Air Conditioning Clutch Transmission, Ignition 1 6-105...
Page 416 Fuses Usage Fuses Usage Engine Control Module (ECM), Starter (J-Case) Powertrain Control Module (PCM) Antilock Brake System (ABS) Motor Climate Control System, Instrument (J-Case) Panel Cluster Ignition 1 Cooling Fan 2 (J-Case) Airbag System Cooling Fan 1 (J-Case) Horn Windshield Wiper Relays Usage Fog Lamps...
Page 417: Rear Underseat Fuse Block
Rear Underseat Fuse Block The rear fuse block is located under the rear seat on the driver side. The rear seat cushion must be removed to access the rear fuse block. Removing the Rear Seat Cushion Notice: If you touch the exposed wires with the metal on the seat cushion, you could cause a short that could damage the battery and or wires.
Page 418 To reinstall the rear seat cushion, do the following: WARNING: (Continued) will not be there to work for the next passenger. The person sitting in that position could be badly injured. After reinstalling the seat cushion, always check to be sure that the safety belts are properly routed and are not twisted.
Page 419 Fuses Usage Fuses Usage Fuel Pump Engine Control Module (ECM)/ Transmission Control Module (TCM) Left Park Lamp Memory Module Run 3 - Rear Blower Right Park Lamp (optional) Right Park Lamp 6-109...
Page 420 Fuses Usage Fuses Usage Steering Wheel Illumination Retained Accessory Power 1 (RAP) Front Heated/Cooled Seat Module Passenger Door Module Run 2 - Heated/Cooled Seats Sensing and Diagnostic Module Rear Heated Seat Module Accessory Power Outlets RPA Module Body Control Module (BCM) (Inadvertent) ®...
Page 421 Fuses Usage Relays Usage Electronic Leveling Control Unlock Compressor (J-Case) Lock Blower (J-Case) (optional) Blower (J-Case) (optional) Not Used Door Unlatch (optional) Resistor Usage Trunk Release Terminating Resistor Stoplamp (optional) Overhead Lamps (optional) Relays Usage Retained Accessory Power (RAP) Front Blower (optional) Rear Defogger Circuit Usage...
Page 422: Capacities And Specifications
Capacities and Specifications The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 7 9 for more information. Capacities Application English Metric For the air conditioning system refrigerant charge Air Conditioning Refrigerant amount, see the refrigerant label located under the hood.
Page 423 Section 7 Maintenance Schedule Maintenance Schedule ......7-2 Recommended Fluids and Lubricants ... 7-9 Introduction .
Page 424: Maintenance Schedule
Maintenance Schedule The maintenance schedule is for vehicles that: carry passengers and cargo within recommended limits on the Tire and Loading Information label. Introduction See Loading the Vehicle on page 5 18. Maintenance intervals, checks, inspections, are driven on reasonable road surfaces within legal recommended fluids, and lubricants are necessary driving limits.
Page 425: Scheduled Maintenance
At your dealer, you can be certain that you will receive Scheduled Maintenance the highest level of service available. Your dealer has When the Change Engine Oil Soon specially trained service technicians, uses genuine replacement parts, as well as, up to date tools and Message Displays equipment to ensure fast and accurate diagnostics.
Page 426 Fluids visual leak check (or every 12 months, Every Engine Oil Change whichever occurs first). A leak in any system must Change engine oil and filter. Reset oil life system. be repaired and the fluid level checked. See Engine Oil on page 6 15 and Engine Oil Life Engine air cleaner filter inspection.
Page 427: Additional Required Services
Additional Required Services Once a Year Starter switch check. See Owner Checks and Every 12 000 km/7,500 Miles Services on page 7 7. Rotate tires. Tires should be rotated every Automatic transmission shiftlock control function 12 000 km/7,500 miles. See Tire Inspection and check.
Page 428 First Engine Oil Change After Every First Engine Oil Change After Every 80 000 km/50,000 Miles 160 000 km/100,000 Miles Engine air cleaner filter replacement. See Engine Automatic transmission fluid and filter change Air Cleaner/Filter on page 6 19. (normal service). See Automatic Transmission Fluid on page 6 21.
Page 429: Owner Checks And Services
Owner Checks and Services Automatic Transmission Shift Lock Control Function Check Starter Switch Check WARNING: WARNING: When you are doing this inspection, the vehicle When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or could move suddenly.
Page 430: Ignition Transmission Lock Check
Ignition Transmission Lock Check Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the While parked, and with the parking brake set, try to turn parking brake. the ignition to LOCK/OFF in each shift lever position. To check the parking brake's holding ability: With The ignition should turn to LOCK/OFF only when the engine running and the transmission in...
Page 431: Recommended Fluids And Lubricants
Recommended Fluids and Usage Fluid/Lubricant Lubricants Power GM Power Steering Fluid Steering (GM Part No. U.S. 89021184, in Fluids and lubricants identified below by name, part System Canada 89021186). number, or specification can be obtained from your ® Automatic DEXRON -VI Automatic Transmission dealer.
Page 432: Maintenance Replacement Parts
Maintenance Replacement Parts Replacement parts identified here by name, part number, or specification can be obtained from your dealer. Part GM Part Number ACDelco Part Number Engine Air Cleaner/Filter Element 22676970 A1627C Engine Oil Filter 89017342 PF61 Passenger Compartment Air Filter Element 25906375 CF118C Spark Plugs...
Page 433: Engine Drive Belt Routing
Engine Drive Belt Routing 4.6L V8 Engines 7-11...
Page 434: Maintenance Record
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts. Maintenance Record Odometer Date Serviced By Maintenance Stamp Services Performed Reading 7-12...
Page 435 Maintenance Record (cont'd) Odometer Date Serviced By Maintenance Stamp Services Performed Reading 7-13...
Page 436 Maintenance Record (cont'd) Odometer Date Serviced By Maintenance Stamp Services Performed Reading 7-14...
Page 437: Customer Assistance Information
Section 8 Customer Assistance Information Customer Assistance and Information ... 8-2 Reporting Safety Defects ......8-14 Customer Satisfaction Procedure .
Page 438: Customer Assistance And Information
Information resolved by the dealership without further help, in the U.S., call the Cadillac Customer Assistance Center at 1 800 458 8006. In Canada, call the Canadian Cadillac Customer Satisfaction Procedure Customer Communication Centre at 1-888-446-2000. Your satisfaction and goodwill are important to your We encourage you to call the toll-free number in order dealer and to Cadillac.
Page 439 STEP THREE U.S. Owners: Both General Motors You may contact the BBB Auto Line Program using the and your dealer are committed to making sure you are toll-free telephone number or write them at the following completely satisfied with your new vehicle. However, address: if you continue to remain unsatisfied after following the BBB Auto Line Program...
Page 440 STEP THREE Canadian Owners: In the event that For further information concerning eligibility in the you do not feel your concerns have been addressed Canadian Motor Vehicle Arbitration Plan (CAMVAP), call after following the procedure outlined in Steps One toll-free 1 800 207 0685, or call the General Motors and Two, General Motors of Canada Limited wants Customer Communication Centre, 1 800 263 3777 you to be aware of its participation in a no-charge...
Page 441: Online Owner Center
Store online service and maintenance records My Dealers: Save details such as address and Cadillac dealer locator for service nationwide phone number for each of your preferred GM Exclusive privileges and offers dealers.
Page 442: Customer Assistance For Text Telephone (Tty)
1908 Colonel Sam Drive Cadillac encourages customers to call the toll-free Oshawa, Ontario L1H 8P7 number for assistance. However, if a customer wishes www.gm.ca to write or e-mail Cadillac, the letter should be addressed to: 1-888-446-2000 1-800-263-3830 (For Text Telephone United States...
Page 443: Gm Mobility Reimbursement Program
Mexico, Central America and Caribbean For more information on the limited offer, visit www.gmmobility.com or call the GM Mobility Assistance Islands/Countries (Except Puerto Rico Center at 1-800-323-9935. Text telephone (TTY) users, and U.S. Virgin Islands) call 1-800-833-9935. General Motors de Mexico, S. de R.L. de C.V. General Motors of Canada also has a Mobility Program.
Page 444: Cadillac Owner Privileges
Emergency Tow From a Public Road or Coverage Highway: Tow to the nearest Cadillac dealer for Services are provided up to 5 years/160 000 km warranty service, or if the vehicle was in a crash (100,000 miles), whichever comes first.
Page 445 $5 Canadian. Diesel fuel delivery may be than an auto club or towing service. It provides every restricted. Propane and other fuels are not Cadillac owner in the United States with the advantage provided through this service. of contacting a Cadillac advisor and, where available,...
Page 446: Scheduling Service Appointments
Scheduling Service Appointments Several Courtesy Transportation options are available to assist in reducing your inconvenience when warranty When your vehicle requires warranty service, contact repairs are required. your dealer and request an appointment. By scheduling Courtesy Transportation is not a part of the New Vehicle a service appointment and advising your service Limited Warranty.
Page 447: Additional Program Information
Public Transportation or Fuel and meet state/provincial, local, and rental vehicle provider requirements. Requirements vary and Reimbursement may include minimum age requirements, insurance If your vehicle requires overnight warranty repairs, and coverage, credit card, etc. You are responsible for fuel public transportation is used instead of the dealer's usage charges and may also be responsible for taxes, shuttle service, the expense must be supported by...
Page 448: Collision Damage Repair
Collision Damage Repair originally designed appearance and safety performance; however, the history of these parts is not known. Such If your vehicle is involved in a collision and it is parts are not covered by your GM New Vehicle Limited damaged, have the damage repaired by a qualified Warranty, and any related failures are not covered by technician using the proper equipment and quality...
Page 449: Insuring Your Vehicle
Insuring Your Vehicle Give only the necessary information to police and other parties involved in the crash. Protect your investment in your GM vehicle with For emergency towing see Roadside Service on comprehensive and collision insurance coverage. There page 8 7. are significant differences in the quality of coverage afforded by various insurance policy terms.
Page 450: Reporting Safety Defects
Managing the Vehicle Damage Repair Reporting Safety Defects Process Reporting Safety Defects to the In the event that your vehicle requires damage repairs, United States Government GM recommends that you take an active role in its repair. If you have a pre-determined repair facility of If you believe that your vehicle has a defect choice, take your vehicle there, or have it towed there.
Page 451: Reporting Safety Defects To General
Reporting Safety Defects to the In Canada, call 1 888 446 2000, or write: Canadian Government Canadian Cadillac Customer Communication Centre, Mail Code: CA1-163-005 If you live in Canada, and you believe that your General Motors of Canada Limited vehicle has a safety defect, notify Transport Canada...
Page 452: Owner Information
Owner Information Current and Past Models Owner publications are written specifically for owners Technical Service Bulletins and Manuals are available and intended to provide basic operational information for current and past model GM vehicles. about the vehicle. The Owner Manual includes the ORDER TOLL FREE: 1-800-551-4123 Maintenance Schedule for all models.
Page 453: Vehicle Data Recording And Privacy
Vehicle Data Recording and to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in Privacy this vehicle is designed to record such data as: How various systems in your vehicle were Your GM vehicle has a number of sophisticated operating computers that record information about the vehicle s...
Page 454: Onstar
GM will not access this data or share it with others Radio Frequency except: with the consent of the vehicle owner or, if the Identification (RFID) vehicle is leased, with the consent of the lessee; in response to an official request of police or similar RFID technology is used in some vehicles for functions government office;...
Page 455 Antenna Backglass ........4-116 Accessories and Modifications .
Page 456 Audio System ........4-86 Brakes .
Page 457 Care of Cleaning Aluminum or Chrome-Plated Wheels ... .6-100 Safety Belts ........6-97 CD, MP3 .
Page 458 Compressor Kit, Tire Sealant ..... . 6-75 Content Theft-Deterrent ......3-19 Damage Repair, Collision .
Page 459 Driving (cont.) Engine Hill and Mountain Roads ......5-14 Air Cleaner/Filter ....... . . 6-19 In Rain and on Wet Roads .
Page 460 Fuel (cont.) Gasoline Octane ........6-5 Filter Gasoline Specifications .
Page 461 Hood Checking Things Under ......6-12 Hazard Warning Flashers ......4-3 Release .
Page 462 Lights Airbag Readiness ....... . . 4-48 Keyless Entry Antilock Brake System (ABS) Warning ... . 4-51 Remote (RKE) System .
Page 463 Locks Malfunction Indicator Lamp ......4-54 Central Door Unlocking System ....3-10 Massaging Lumbar Controls .
Page 464 Object Detection, Side Blind Zone Alert (SBZA) . . . 3-42 Paint, Damage ........6-101 Odometer .
Page 465 Power Door Locks ........3-10 Radio Frequency Electrical System .
Page 466 Reclining Seatbacks, Power ......2-8 Recommended Fluids and Lubricants ....7-9 Safety Belts Recreational Vehicle Towing .
Page 467: Securing A Child Restraint
Seats (cont.) Spare Tire ......... 6-93 Power Lumbar .
Page 468 Storing the Tire Sealant and Compressor Kit ..6-82 Tires (cont.) High-Speed Operation ......6-59 Stuck in Sand, Mud, Ice, or Snow .
Page 469 Traction Control System (TCS) ......5-6 Valet Lockout Switch ......3-18 Control System Warning Light .
Page 470 Windshield Washer ......... . . 4-11 Warning Lights, Gauges, and Indicators .

Cadillac DTS 2011 Owner's Manual

Table of Contents

Section 2 Seats and Restraint System

Section 3 Features and Controls

Section 4 Instrument Panel

Section 5 Driving Your Vehicle

Quick Links

Chapters

Related Manuals for Cadillac DTS 2011

Summary of Contents for Cadillac DTS 2011