Cadillac 2011 DTS Owner's Manual page 264

To connect to a different cell phone, the Bluetooth
system looks for the next available cell phone in the
order in which all the available cell phones were paired.
Depending on which cell phone you want to connect to,
you may have to use this command several times.
1. Press and hold
2. Say Bluetooth.
3. Say Change phone.
If another cell phone is found, the response will
be <Phone name> is now connected.
If another cell phone is not found, the original
phone remains connected.
The system can store up to 30 phone numbers as name
tags in the Hands Free Directory that is shared between
the Bluetooth and OnStar systems.
The following commands are used delete and store
phone numbers.
This command will store a phone number, or a
group of numbers as a name tag.
This command allows a phone number to
be stored as a name tag by entering the digits one at
a time.
4-106
for two seconds.
This command is used to delete individual
name tags.
stored name tags in the Hands Free Calling Directory
and the OnStarTurn by Turn Destinations Directory.
1. Press and hold
2. Say Store.
3. Say the phone number or group of numbers you
want to store all at once with no pauses, then
follow the directions given by the system to save a
name tag for this number.
If an unwanted number is recognized by the system,
say Clear at any time to clear the last number.
To hear all of the numbers recognized by the system,
say Verify at any time.
1. Press and hold
2. Say Digit Store.
3. Say each digit, one at a time, that you want to
store. After each digit is entered, the system
repeats back the digit it heard followed by a tone.
This command deletes all
for two seconds.
for two seconds.