Table of Contents
Advertisement
Item
Function/settings
PROXY DIR
Determines the directory where
the generated proxies are stored.
Same as Main Files: Proxies are
Proxy Directory: "proxy/" directory
Resolution directory: When the
Saving and Recalling GUI
Configuration Data
GUI configuration data is temporarily saved in your
browser's cookies.
By naming this configuration data and saving it to the
mounted file server, you can recall the data later to restore
the previous configuration.
1
Click the PROXY SETUP menu button in the web
application screen, and click the COOKIE tab.
The COOKIE tab screen appears.
stored in the same directory
as the main picture files.
is automatically created right
under the directory where the
main picture files are stored.
Proxies are stored in the
"proxy/" directory.
main picture files are stored
in directories labeled
according to size (e.g., 1920
× 1080), a directory for
storing small-size picture files
(e.g., 320 × 180) is created to
store proxies. When the main
picture files are not stored in
directories according to
picture file size, proxies are
stored in the same directory
where their main picture files
are stored.
When importing files, a
directory for storing main
picture files and a directory
for storing their proxies
labeled according to size
(e.g., 1920 × 1080, 320 ×
180) are created directly
under the specified directory.
The main picture files and
their proxies are stored in
these directories.
2
Enter a name for the cookie in the NAME box of the
SAVE area, and then click the SAVE button.
The entered file name is automatically appended with
the date.
Then, the cookie is stored in the directory for cookies
on the mounted server.
To recall GUI setup data
Click the NAME box of the LOAD/DELETE area, select
the stored cookie, and then click the LOAD button.
Selecting "Factory Preset" at this time resets the GUI
settings to their default values.
To delete GUI setup data
Click the NAME box of the LOAD/DELETE area, select
the stored cookie, and then click the DELETE button.
Configuring the Monitor Output
Signal
You can select the type of SDI signal that is output from
the AUX OUTPUT connector ([PC5]) or MONITOR
connector ([PC4]) on the rear of the unit.
1
Click the DIAGNOSIS menu button in the web
application screen, and click the SYSTEM FORMAT
tab.
The SYSTEM FORMAT tab screen appears.
2
Select the video format in the matrix table.
3
Select one of the following in the DUAL/3G setting.
[PC5]
DUAL: Dual link (1.5G HD SDI)
3G: 3G HD SDI output
[PC4]
1.5G: 1.5G HD SDI output
3G: 3G HD SDI output
15
Setup
Advertisement
Table of Contents
