Ics Configuration; Setting The Ics Volume; Setting The Ics Squelch; Enable/Disable Pilot Isolation - Garmin GTR 200 Pilot's Manual

ICS CONFIGURATION

The GTR 200 features a stereo integrated Intercom System (ICS). The GTR
200 may also be installed and configured for Keyed ICS operations. Keyed
ICS is typically used in an extremely noisy environments, such as an open
cockpit. The ICS is enabled or disabled in Configuration Mode. See the GTR
200 Installation Manual for installation and configuration details.

Setting the ICS Volume:

1) Press the MENU key.
2) Turn the LARGE Knob to highlight the ICS VOL field.
3) Turn the SMALL Knob clockwise to increase, or counter clockwise to
decrease volume.

Setting the ICS Squelch:

1) Press the MENU key.
2) Turn the LARGE Knob to highlight the ICS SQ field.
3) Turn the SMALL Knob clockwise to increase, or counter clockwise to
decrease squelch. Turn the SMALL Knob one click counter clockwise
past 0% to enable ICS auto squelch.
NOTE: When Squelch is set to 0%, squelch is always open and when set to
100% squelch is always closed.

Enable/disable Pilot Isolation:

Press the Pilot Isolation
is only available when the Pilot Isolation Softkey is configured.
190-01553-01 Rev. A
Softkey if configured. Pilot Isolation mode
Garmin GTR 200 Pilot's Guide
GTR 200
13