Switch Settings On Circuit Boards; Apr-52 Board - Sony DVW-M2000 Installation Manual

1-10. Switch Settings on Circuit Boards

1-10. Switch Settings on Circuit Boards

1-10-1. APR-52 Board

If necessary, perform the following audio-related settings using the switches on the
APR-52 board.
*1
. Audio input level (Recorder only)
*2
. Audio input headroom
*1
. Audio output level
. Audio output headroom *2
. Monitor output level *1
. Monitor output headroom
. Monitor output level, fixed/variable selection
*1: Select the level for each channel from +4, 0, _3, _20 dBm. (Factory settings: +4 dBm for each channel)
*2: Select the headroom for each channel from 20, 18, 16, 12 dB. (Factory settings: 20 dB for each channel)
n
Refer to Section 1-16 for removing and reattaching the plug-in boards.
A B C D
A
Audio input level settings (Recorder only)
Channel Ref. No.
CH1 S100
CH2 S200
CH3 S300
+4 dBm/600 Z
CH4 S400
(Factory setting)
Audio input headroom settings
Channel Ref. No.
CH1 S101
CH2 S201
CH3 S301
CH4 S401
(Factory setting)
1-16
*2
E F G
S901 S1001
S900 S1000
S902 S1002
APR-52 Board (Side A)
Switches state (\ \ \ \ \ : Knob position)
0 dBm/600 Z
Switches state (\ \ \ \ \ : Knob position)
20 dB 18 dB
H J K L
S401
S800 S700 S600 S500
S801 S701 S601 S501
_3 dBm/600 Z
16 dB
HDW-2000/M2000/M2000P/S2000/S2000P/M2100/M2100P, DVW-2000/2000P/M2000/M2000P
MSW-2000/A2000/A2000P/M2000/M2000P/M2000E/M2000EP/M2100/M2100P/M2100E/M2100EP
< Top View >
APR-52
N P
M
1
S301 S201 S101 2
3
S400 S300 S200 S100
4
5
6
_20 dBm/600 Z
12 dB