Table of Contents
Advertisement
Remote connectors
4 REMOTE 2 PARALLEL I/O (50P)
4 REMOTE1-IN (9P)
4 REMOTE1-OUT (9P)
4 RS-232C
4 CONTROL PANEL
4 VIDEO CONTROL (15P)
4 VIDEO CONTROL (9P)
*3
4 (OPTION)
*4, 5
*** : Refer to Optional "Interface manual" for details.
Output connectors
1 AUDIO OUTPUT
1 CUE OUT
(Excl. MSW-2000/A2000/A2000P)
1 TIME CODE OUT
1 MONITOR OUTPUT
2 VIDEO OUTPUT, COMPOSITE
2 VIDEO OUTPUT, COMPONENT
3 AUDIO OUTPUT (AES/EBU)
5 HD SDI OUTPUT
*3
5 SDI OUTPUT
5 SDTI-CP OUTPUT
*5
5 SDTI OUTPUT (OPTION)
PHONE
(Upper control panel)
Input/Output connector
5 Ethernet
*6
HDW-2000/M2000/M2000P/S2000/S2000P/M2100/M2100P, DVW-2000/2000P/M2000/M2000P
MSW-2000/A2000/A2000P/M2000/M2000P/M2000E/M2000EP/M2100/M2100P/M2100E/M2100EP
***
D-SUB 50P connector
D-SUB 9P connector (RS-422A interface), Remote control
D-SUB 9P connector (RS-422A interface), Remote control
D-SUB 9P connector (RS-232C interface) for ISR (Interactive Status Reporting)
10P connector for an outside control panel connection only
D-SUB 15P connector for a TBC remote controller (BVR-50) exclusive connection
D-SUB 9P connector for a TBC remote controller (HKDV-900) connection
D-SUB 9P connector for an optional kit
XLR 3-pin x 4 (1 set : CH1, CH2, CH3, and CH4)
Analog audio
+4 dBm (Standard) (600 Z load), low impedance, balanced
XLR 3-pin x 4 (1 set : CH1, CH2, CH3, and CH4)
Analog audio
+4 dBm (Standard) (600 Z load), low impedance, balanced
XLR 3-pin x 1
Time code 2.2 V p-p, low impedance, balanced
XLR 3-pin x 2 (1 set : L and R)
Analog audio
+4 dBm (Standard) (600 Z load), low impedance, balanced
BNC x 3 (including 1 for character superimpose)
Analog composite video 1.0 V p-p, 75 Z, sync negative
BNC x 3 (1 set : Y, R-Y, and B-Y)
Analog component video
Y
: 1.0 V p-p, 75 Z, sync negative
R-Y/B-Y : 0.7 V p-p, 75 Z
BNC x 4 (1 set : CH1/2, CH3/4, CH5/6, and CH7/8) or
BNC x 2 (1 set : CH1/2, CH3/4)
Digital audio
AES/EBU format, complies with AES-3id-1995
BNC x 3 (including 1 for character superimpose)
Serial digital interface (270 Mbit/s), complies with SMPTE 292
BNC x 3 (including 1 for character superimpose)
Serial digital interface (270 Mbit/s), complies with SMPTE 259M & ITU-R BT.656
BNC x 2
Serial data transport interface (270 Mbit/s), complies with SMPTE 326M (SDTI-CP)
*3
BNC x 2
Serial data transport interface (270 Mbit/s), complies with SMPTE 305M (SDTI)
JM-60 stereo phone jack
Analog audio
up to _12 dBu (8 Z load), unbalanced
RJ-45 modular jack (with LED)
1000BASE-T (compliant with IEEE802.3ab)
100BASE-TX (compliant with IEEE802.3u)
10BASE-T (compliant with IEEE802.3i)
(Automatically detected by Auto-Negotiation)
1-8. Signal Inputs and Outputs
1-11
Hide quick links:
Advertisement
Table of Contents
