Control Elements; Leds On The Control Panel - Fujitsu PRIMERGY BX900 S1 Operating Manual

5.1.1.1

Control elements

On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V
I
ID ID button
Lights up (blue) on the front and on the rear of the system unit when
the ID button is pressed. The two ID indicators are synchronized.
Navigation buttons for the LocalView menu system
With the buttons
OK
the
5.1.1.2

LEDs on the control panel

Power indicator (two-color)
Lights up green when the system unit is switched on.
Lights up orange when the system unit is switched OFF, but mains
voltage is present (standby mode).
BX900 S1
CAUTION!
Risk of loss of data!
The On/Off button does not disconnect the server from the
mains voltage. To disconnect from the mains completely,
remove the power plug(s).
, ,
button executes the selected function.
Operating Manual
Installation and operation
and you select a function. Pressing
61