8.2.11 Installing A Connection Blade - Fujitsu PRIMERGY BX900 S1 Operating Manual

Hot-plug components

8.2.11 Installing a connection blade

V
CAUTION!
Note the safety instructions and the information on handling
electrostatically sensitive devices in
page 27.
Removing dummy module(s)
Any unused connection blade slots are fitted with appropriate dummy modules
to comply with electromagnetic compatibility (EMC) regulations and to ensure
sufficient cooling of the system components.
Figure 42: Dummy connection blade module
To add connection blades, you must first remove the dummy modules from the
relevant slots.
120
section "Safety instructions" on
Operating Manual
BX900 S1