4.
The utility verifies the file, then starts updating the BIOS file.
FLASH TYPE:
BOARD:
VER:
DATE:
PATH:
Note
Writing BIOS:
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
5.
The utility returns to the DOS prompt after the BIOS update process is completed.
Reboot the system from the hard disk drive.
The BIOS update is finished! Please restart your system.
C:\>
4-6
ASUSTek BIOS Update for DOS V1.30 (11/08/04)
MXIC 25L1605A
Current ROM
Z9PE-D16-10G
0203
04/30/2013
WARNING! Do not turn off power during flash BIOS
Update ROM
BOARD:
Z9PE-D16-10G
VER:
0206
DATE:
04/30/2013
Chapter 4: BIOS setup