Table of Contents
Advertisement
The ARRAY SELECTION MENU displays the available drives connected to the SATA
2.
ports. Use the up/down arrow keys to select the drives you want to include in the RAID
set, and then press <Space>. When selected, the drive indicator changes from READY
to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 2 DISK
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
•
The information of the selected hard disk drive displays at the bottom of the screen.
•
You need at least two identical hard disk drives when creating a RAID 1 set.
•
You need at least four identical hard disk drives when creating a RAID 10 set.
3.
Select all the drives required for the RAID set, and then press <F10> to configure array
setting.
4.
Press <Space> to select the configurable array.
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Cursor Keys, SPACE-(De)Select F2-Chidinfo F3-SlotInfo F10-Configure Esc-Quit
Z9PE-D16-10G Series
BIOS Version
A.10.09231523R
Easy Configuration - ARRAY SELECTION MENU
PORT #
0
ONLIN A00-00
1
ONLIN A00-01
2
READY
3
READY
74.74GB HDS728080PLA380
BIOS Version
A.10.09231523R
Easy Configuration - ARRAY SELECTION MENU
Select Configurable Array(s)
PORT #
A-0
0
ONLIN A00-00
SPAN-1
1
ONLIN A00-01
2
READY
3
READY
05.01C05
5-7
Advertisement
Table of Contents
