Table of Contents
Advertisement
2.
Press the left load lever with your thumb
(A), then move it to the left (B) until it is
released from the retention tab.
To prevent damage to the socket pins,
do not remove the PnP cap unless
you are installing a CPU.
3.
Slightly lift the load lever in the direction
of the arrow.
4.
Press the right load lever with your
thumb (C), then move it to the right (D)
until it is released from the retention tab.
Lift the load lever in the direction of the
arrow (E).
2-10
A
B
Load lever
C
Chapter 2: Hardware information
E
D
Advertisement
Table of Contents
