Initializing The Virtual Drives - Asus Z9PE-D16-10G Series Manual

5.2.3

Initializing the virtual drives

After creating the RAID set(s), you must initialize the virtual drives. You may initialize the
virtual drives of a RAID set(s) using the Initialize or Objects command on the Management
Menu.
Using the Initialize command
To initialize the virtual drive using the Initialize command
From the Management Menu, select Initialize, and then press <Enter>.
1.
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
2. The screen displays the available RAID set(s) and prompts you to select the virtual
drive to initialize. Use the arrow keys to select the virtual drive from the Virtual Drive
selection, and then press <Space>.
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Virtual Drives
Virtual Drive 0
Z9PE-D16-10G Series
BIOS Version A.10.09231523R
Initialize VD(s)
BIOS Version A.10.09231523R
Virtual Drive(s) Configured
Easy Configuration - ARRAY SELECTION MENU
LD RAID Size
0 1 148.580GB
Select VD
SPACE-(De)Select, F10-Initialize
#Stripes StripSz
2 64KB
Status
ONLINE
5-13