B Preparation
Connecting the Projector
Notes
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.
• Use a no-resistance audio cable.
Connecting a Computer
Connection with a computer is explained for each input signal.
INPUT A
For connection when there is some distance between a computer and the projector.
Computer
INPUT B
For connecting a computer with an RGB output connector.
Computer
Note
It is recommended that you set the resolution of your computer to 1920 × 1200 pixels (VPL-FH36/
FH35/FH31/FH30) or 1024 × 768 pixels (VPL-FX37/FX35/FX30) for the external monitor.
8
Connecting the Projector
Mini D-sub 15-pin
– BNC cable
(not supplied)
RGB output
connector
Audio cable
Audio output
(Stereo mini plug)
connector
(not supplied)
Mini D-sub 15-pin
RGB output
cable
connector
(not supplied)
Audio output
connector
Audio cable
(Stereo mini plug)
(not supplied)