Page 1
WUXGA Installation Projectors VPL-FH30 and VPL-FH35 www.pro.sony.eu/projectors...
Page 2
“blend-in” design Packing the most advanced projector technologies into a “blend-in” design, the VPL-FH30 and VPL-FH35 are excellent choices for universities, corporates, museums and medical (DICOM) applications. Delivering a dramatic colour brightness of 4300 and 5200 lumens respectively and ultra high-quality images with WUXGA resolution, the projectors offer peace of mind operation, amazing installation flexibility and hassle-free maintenance in a stylish design that blends into any decor.
Page 3
VPL-FH35 3500 hours lamp-control technology, the projectors offer the recommended lamp replacement time of approximately Conventional 4,000 hours* (VPL-FH30) and 3500 hours* 3000 hours Model (VPL-FH35). * In Standard mode. Longer Lamp Exchange Time *1 These values are approximate...
Page 4
Excellent Throw Ratio Coverage for Old Projector Replacement The 1.6x zoom and 1.39 to 2.23 throw ratio standard lens enables installation flexibility when replacing an existing projector with the VPL-FH30 or VPL-FH35, there’s no need to change ceiling mount positions. For applications where more than a standard lens is needed, the projectors are compatible with the optional VPLL-Z1024PK and VPLL-Z1032PK accessory lenses designed for Sony’s current VPL-FX40 Series.
Page 5
Quad Filter System Standard 2.2 DICOM GSDF sim. DICOM GSDF Simulation* The VPL-FH30 and VPL-FH35 are equipped with a new gamma mode, called DICOM GSDF Simulation. This is ideal for viewing digital medical imagery for 1000 Input Level non-diagnostic applications.