Tty Operation - Motorola BACKFLIP User Manual

• You must use the cables included with
the Motorola Original
the data kit user's guide for more
information).
• Make sure to connect the phone to a
high-power USB port on your computer
(not a low-power one such as the USB
port on your keyboard or bus-powered
USB hub). Typically, USB high-power
ports are located directly on your
computer.
Note: If you connect your phone to a
low-power USB port, the computer
may not recognize your phone.
• Make sure both your phone and the
computer are turned on.
TM
data kit (see

TTY operation

You can use an optional TTY device with your
phone to send and receive calls. You must
plug the TTY device into the phone's headset
connector and set the phone to operate in
one of three TTY modes.
Note: Use a TSB-121 compliant cable
(provided by the TTY manufacturer) to
connect the TTY device to your phone. If the
cable has a 2.5mm jack, you will also need
a Motorola Original
adapter to attach the jack to the phone.
Note: Set the phone to level 4 (middle setting)
for proper operation. If you experience a high
number of incorrect characters, adjust the
volume as needed to minimize the error rate.
Note: For optimal performance, your phone
should be at least 12 inches (30 centimeters)
from the TTY device. Placing the phone too
TM
2.5mm-to-EMU TTY
main attractions 29