3
charge the battery
New batteries are not
fully charged. Plug the
battery charger into your
phone and an electrical
outlet. Your phone might
take several seconds to start charging the
battery.
If your phone is charging while powered off, it
displays Charge Complete when finished.
If your phone is powered on while charging, it
displays a temporary charge complete
4
message, and the battery symbol stops
flashing.
Tip: Relax, you can't overcharge your battery.
It will perform best after you fully charge and
discharge it a few times.
You can charge your battery by
connecting a cable from your
phone's mini-USB port to a USB
port on a computer. Both your
phone and the computer must be turned on,
and your computer must have the correct
software drivers installed. Cables and
software drivers are available in Motorola
Original data kits, sold separately.
turn it on & off
1 Open your phone.
essentials
11