Tty Operation - Motorola T6GM2 User Manual

To use this feature:
1 Insert the USB cable into the USB port on the left
side of the phone. The phone will display Connect
phone as storage device?
2 Press Yes to use phone as a portable USB storage
device.
Note: When the phone is in this mass storage mode,
it cannot make or receive calls, or perform any other
functions. Disconnecting will resume normal
operation.
or
Press No to enable USB charge if the connected device
is a PC. It requires driver software, which can be
obtained at www.motorola.com.
Downloaded files can be viewed by:
Find it: s h
> Multimedia > Pictures or Sounds > Additional
Storage Device
50 connections

TTY operation

You can use an optional TTY device with your
phone to send and receive calls. You must plug the
TTY device into the phone's headphone jack and set
the phone to operate in one of three TTY modes.
Note: Use a TSB-121 compliant cable (provided by the
TTY device manufacturer) to connect the TTY device
to the phone.
Note: Set the phone volume to level 4 (middle setting)
for proper operation. If you experience a high number
of incorrect characters, adjust the volume as needed
to minimize errors.
Note: For optimal performance, your phone should be
at least 12 inches (30 centimeters) from the TTY
device. Placing the phone too close to the device may
cause high error rates.