Selecting Power & Cook Time; Quick Min Feature; Keep Warm Feature - Panasonic NN-SN773S Operating Instructions Manual

Selecting Power
Example: To cook at P 6 (MEDIUM)
power for 1 minute 30 seconds
1.
Press 5 times.
2.
3.
Press
once P10 (HIGH)
twice P9
3 times P8
4 times P7 (MED-HIGH)
5 times P6 (MEDIUM)
6 times P5
7 times P4
8 times P3 (MED-LOW)/DEFROST
9 times P2
10 times P1 (LOW)
NOTES:
1. For more than one stage cooking, repeat
steps 1 and 2 for each stage of cooking
before pressing Start Pad. The maxi-
mum number of stages for cooking is 3.
When operating, two beeps will sound
between each stage. Five beeps will
sound at the end of the entire sequence.
2. When selecting P10 (HIGH) power for
the fi rst stage, you may begin at step 2.
3. When selecting P10 (HIGH) power, the
maximum programmable time is 30 min-
utes. For other power levels, the maxi-
mum time is 99 minutes and 99 seconds.
4. For reheating, use P10 (HIGH) for liq-
uids, P7 (MED-HIGH) for most foods and
P6 (MEDIUM) for dense foods.
5. For defrosting, use P3 (MED-LOW).
DO NOT OVER COOK. This oven requires
less time to cook than an older unit. Over
cooking will cause food to dry out and may
cause a fi re. A microwave oven's cooking
power tells you the amount of microwave
power available for cooking.
& Cook Time
• Press Power Level
until the desired
power level appears
in the display window.
• Set Cooking Time us-
ing number pads.
• Press Start.
Cooking will start.
The time in the
display window will
count down.
Power Level

Quick Min Feature

This feature allows you to set or add
cooking time in 1 minute increments up to
10 minutes.
To Set Cooking Time:
1.
2.
NOTES:
1. If desired, you can use other power
levels. Select desired power level before
setting cooking time.
2. After setting the time by Quick Min Pad,
you cannot use Number Pads.
3. Quick Min Pad can be used to add more
time during manual cooking.

Keep Warm Feature

This feature will keep food warm for up to
30 minutes after cooking.
Example: To keep 2 cups of gravy warm
for 10 minutes
1.
2.
3.
NOTE:
Keep Warm can be programmed as the
fi nal stage after cook time/s have been
manually entered. It cannot be used in
combination with sensor or auto features.
13
• Press Quick Min until
the desired cooking
time (up to 10 minutes)
appears in the display
window. Power Level is
pre-set at P10.
• Press Start.
Cooking begins and the
time will count down. At
the end of cooking, 5
beeps sound.
• Press Keep Warm
• Set warming time using
number pads, up to 30
minutes.
• Press Start.
Keep Warm will start.
The time in the dis-
play window will count
down.