Table of Contents
Advertisement
Installing a hard drive
To install the hard drive for the EliteBook:
1.
Insert the hard drive into the hard drive bay at an angle (1), and then lay the hard drive flat in the
hard drive bay (2).
2.
Pull the plastic tab (3) towards the center of the computer to engage the hard drive with the
connector.
3.
Tighten the hard drive screws (4).
4.
Rotate the SmartCard reader (1) until it lays flat on top the hard drive.
5.
Press the SmartCard reader down and toward the side of the computer (2) to engage it into
place.
6.
Replace the bottom cover (see
7.
Insert the battery (see
44
Chapter 6 Maintenance
Replacing the bottom cover on page
Inserting or removing the battery on page
40).
38).
Advertisement
Table of Contents
