Page 2
Bluetooth is a trademark owned by its common to most models. Some features otherwise using any software product proprietor and used by Hewlett-Packard may not be available on your computer. preinstalled on this computer, you agree to Company under license. Microsoft and be bound by the terms of the HP End User Windows are U.S.
Page 3
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
Table of contents 1 Welcome ................................1 Finding information ..........................2 2 Getting to know your computer ........................4 Top ............................... 5 TouchPad ..........................5 Lights ........................... 6 Buttons and fingerprint reader ..................... 8 Keys ........................... 10 Front ..............................12 Right ..............................
Page 6
Turning the embedded numeric keypad on and off ......32 Switching key functions on the embedded numeric keypad ..... 32 Using an optional external numeric keypad ............32 Using pointing devices ........................32 Setting pointing device preferences ................... 32 Using the pointing stick ...................... 33 Using the TouchPad ......................
Page 7
Using the Windows recovery tools ..............57 Using f11 recovery tools ..................58 Using a Windows Vista operating system DVD (purchased separately) ... 58 8 Customer support ............................60 Contacting customer support ......................61 Labels ..............................62 9 Specifications ..............................63 Input power ............................
Welcome ● Finding information After you set up and register the computer, it is important to take the following steps: ● Connect to the Internet—Set up your wired or wireless network so that you can connect to the Internet. For more information, refer to Networking on page ●...
Finding information The computer comes with several resources to help you perform various tasks. Resources For information about ● Quick Setup poster How to set up the computer ● Help to identify computer components Getting Started guide ● Computer features ●...
Page 11
North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd, Boise, ID 83714, USA ● Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy ● Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507 Please include your product number, warranty period (found on your serial number label), name, and postal address.
TouchPad NOTE: Your computer may look slightly different from the illustration in this section. Component Description Pointing stick (select models only) Moves the pointer and selects or activates items on the screen. Left pointing stick button Can be used with the pointing stick and functions like the left button on an external mouse.
Lights NOTE: Refer to the illustration that most closely matches your computer. Component Description ● TouchPad on/off light Amber: The TouchPad is off. ● Off: The TouchPad is on. Caps lock light On: Caps lock is on. ● Power light On: The computer is on.
Page 15
Component Description ● Wireless light White: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is on. ● Amber: All wireless devices are off. ● QuickWeb light On: The computer is on. ●...
Buttons and fingerprint reader NOTE: Refer to the illustration that most closely matches your computer. Component Description TouchPad on/off button Turns the TouchPad on and off. Chapter 2 Getting to know your computer...
Page 17
Component Description ● Power button When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep.
Keys NOTE: Refer to the illustration that most closely matches your computer. Component Description Displays system information when pressed in combination with the key. Function keys Execute frequently used system functions when pressed in combination with the key. Chapter 2 Getting to know your computer...
Page 19
Component Description Executes frequently used system functions when pressed in combination with a function key, the num lk key, or the key. Start key Displays the Start menu. Menu key Displays the active program’s shortcut menu (same as right-click menu). Embedded numeric keypad keys Can be used like the keys on an external numeric keypad when pressed in combination with the...
Front NOTE: Refer to the illustration that most closely matches your computer. Component Description Display release latch Opens the computer. ● Wireless light White: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is on.
Page 21
Component Description ● Hard drive light Blinking turquoise: The hard drive or optical drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive. Speaker Produces SRS Premium sound (select models only). NOTE: To use the SRS Premium sound software, select Start >...
Right NOTE: Refer to the illustration that most closely matches your computer. Component Description Audio-out (headphone) jack Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio. NOTE: When a device is connected to the headphone jack, the computer speakers are disabled.
Page 23
Component Description Audio-out (headphone) jack Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio. NOTE: When a device is connected to the headphone jack, the computer speakers are disabled. Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array microphone, or monaural microphone.
Left NOTE: Refer to the illustration that most closely matches your computer. Component Description Power connector Connects an AC adapter. 1394 port Connects an optional IEEE 1394 or 1394a device, such as a camcorder. USB or SuperSpeed USB ports (2) Connect optional USB devices.
Display NOTE: Refer to the illustration that most closely matches your computer. Component Description Internal display switch Turns off the display or initiates Sleep if the display is closed while the power is on. NOTE: The display switch is not visible from the outside of the computer.
Page 26
Component Description Keyboard light button Used to activate the keyboard light. *The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region.
Rear NOTE: Refer to the illustration that most closely matches your computer. Component Description RJ-11 (modem) jack Connects a modem cable. External monitor port Connects an external VGA monitor or projector. RJ-45 (network) jack Connects a network cable. Rear...
Bottom Component Description Vents (3) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Battery release latch Releases the battery from the battery bay.
Page 29
Component Description Bluetooth compartment Contains a Bluetooth device. (10) Wireless and memory module Hold an HP Mobile Broadband Module, the memory compartments and hard drive bay modules, and the hard drive. NOTE: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region.
Networking ● Using an Internet service provider (ISP) ● Connecting to a wireless network NOTE: Internet hardware and software features vary depending on computer model and your location. Your computer may support one or both of the following types of Internet access: ●...
Using an Internet service provider (ISP) Before you can connect to the Internet, you must establish an ISP account. Contact a local ISP to purchase Internet service and a modem. The ISP will help set up the modem, install a network cable to connect your wireless computer to the modem, and test the Internet service.
Connecting to an existing WLAN Turn on the computer. Be sure that the WLAN device is on. Click the network icon in the notification area, at the far right of the taskbar. Select a network to connect to. Click Connect. If required, enter the security key.
Configuring a wireless router For help in setting up a WLAN, refer to the information provided by your router manufacturer or your ISP. The Windows operating system also provides tools to help you set up a new wireless network. To use the Windows tools to set up your network: ●...
HP QuickWeb Getting started The HP QuickWeb environment provides a fun and engaging way to perform many of your favorite activities. Your computer is ready to go within seconds of turning it on, allowing you to rapidly access the Internet, widgets, and communication programs. Simply press the QuickWeb button on your computer, and then start browsing the Internet, communicating with Skype, and exploring other HP QuickWeb programs.
Starting HP QuickWeb ● To start HP QuickWeb, press the QuickWeb button when the computer is off or in Hibernation. The following table explains the different behaviors of the QuickWeb button. Button Bahavior QuickWeb button ● When the computer is off or in Hibernation, opens HP QuickWeb. ●...
Using the keyboard Identifying the hotkeys NOTE: Refer to the illustration that most closely matches your computer. A hotkey is a combination of the key (1) and either the key (2) or one of the function keys (3). To use a hotkey: Briefly press the key, and then briefly press the second key of the hotkey combination.
Hotkey combination Description fn+f3 Initiates Sleep, which saves your information in system. The display and other system components turn off and power is conserved. To exit Sleep, briefly press the power button. CAUTION: To reduce the risk of information loss, save your work before initiating Sleep. NOTE: If a critical battery level occurs while the computer is in the Sleep state, the computer initiates Hibernation and the information stored in memory is saved to the hard drive.
Using the embedded numeric keypad Component Description Turns the embedded numeric keypad on and off when pressed in combination with the num lk key. Embedded numeric keypad When the keypad is turned on, it can be used like an external numeric keypad.
Turning the embedded numeric keypad on and off Press fn+num lk to turn on the embedded numeric keypad. Press fn+num lk again to turn off the keypad. NOTE: The embedded numeric keypad is turned off while an external keyboard or numeric keypad is connected to the computer.
Using the pointing stick Press the pointing stick in the direction you want to move the pointer on the screen. Use the left and right pointing stick buttons as you would the left and right buttons on an external mouse. Using the TouchPad To move the pointer, slide one finger across the TouchPad in the direction you want the pointer to go.
Turning the TouchPad off and on To turn the TouchPad off and on, quickly double-tap the TouchPad on/off light. NOTE: The TouchPad on/off light is off when the TouchPad is on. Navigating To move the pointer, slide one finger across the TouchPad in the direction you want the pointer to go. Chapter 5 Keyboard and pointing devices...
Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse. Using TouchPad gestures The TouchPad supports a variety of gestures. To use TouchPad gestures, place two fingers on the TouchPad at the same time. NOTE: TouchPad gestures are not supported in all programs.
Scrolling Scrolling is useful for moving up, down, or sideways on a page or image. To scroll, place two fingers slightly apart on the TouchPad, and then drag them across the TouchPad in an up, down, left, or right motion. NOTE: Scrolling speed is controlled by finger speed.
Rotating Rotating allows you to rotate items such as photos. To rotate, anchor your left forefinger in the TouchPad zone. Move the right forefinger around the anchored finger in a sweeping motion, moving from 12 o’clock to 3 o’clock. To reverse the rotation, move your right forefinger from 3 o’clock to 12 o’clock.
Maintenance ● Inserting or removing the battery ● Removing or replacing the bottom cover ● Replacing or upgrading the hard drive ● Adding or replacing memory modules ● Updating programs and drivers ● Using SoftPaq Download Manager ● Cleaning your computer Inserting or removing the battery NOTE: For additional information on using the battery, refer to the HP Notebook Reference Guide.
Page 47
CAUTION: Removing a battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work and initiate Hibernation or shut down the computer through Windows before removing the battery. Turn the computer upside down on a flat surface, with the battery bay toward you.
Removing or replacing the bottom cover CAUTION: To prevent information loss or an unresponsive system: Save your work and shut down the computer before adding or replacing a memory module or hard drive. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button.
Page 49
To replace the bottom cover: Tilt down the bottom cover to align the front edge of the bottom cover near the front edge of the computer (1). Insert the alignment tabs (2) on the rear edge of the bottom cover with the notches on the computer.
Replacing or upgrading the hard drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button.
Page 51
Use the plastic tab to lift the connector side of the hard drive up at an angle (3) and remove the drive (4) from the computer. To remove the hard drive for the ProBook: Save your work and shut down the computer. Disconnect AC power and external devices connected to the computer.
Installing a hard drive To install the hard drive for the EliteBook: Insert the hard drive into the hard drive bay at an angle (1), and then lay the hard drive flat in the hard drive bay (2). Pull the plastic tab (3) towards the center of the computer to engage the hard drive with the connector.
Connect AC power and external devices to the computer. Turn on the computer. To install the hard drive for the ProBook: Insert the hard drive into the hard drive bay at an angle (1), and then lay the hard drive flat in the hard drive bay (2).
Page 54
CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before adding or replacing memory modules. Do not remove a memory module while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button.
Page 55
CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. Align the notched edge (1) of the memory module with the tab in the memory module slot. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated.
Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis with the latest versions. Go to http://www.hp.com/support to download the latest versions. You can also register to receive automatic update notifications when they become available. Chapter 6 Maintenance...
Using SoftPaq Download Manager HP SoftPaq Download Manager (SDM) is a tool that provides quick access to SoftPaq information for HP business computers without requiring the SoftPaq number. Using this tool, you can easily search for SoftPaqs and then download and unpack them. SoftPaq Download Manager works by reading and downloading, from the HP FTP site, a published database file containing computer model and SoftPaq information.
Cleaning your computer ● Cleaning products ● Cleaning procedures Cleaning products Use the following products to safely clean and disinfect your notebook or tablet PC: ● Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (For example: germicidal disposable wipes. These wipes come in a variety of brand names.) ●...
Cleaning the TouchPad and keyboard CAUTION: When cleaning the TouchPad and keyboard, do not let liquids drip between the keys. This can permanently damage internal components. ● To clean and disinfect the TouchPad and keyboard, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously or use an acceptable germicidal disposable wipe.
Backup and recovery Windows 7 ● Backing up your information ● Performing a system recovery To protect your information, use Windows Backup and Restore to back up individual files and folders, back up your entire hard drive (select models only), create system repair discs (select models only) by using the installed optical drive (select models only) or an optional external optical drive, or create system restore points.
new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup. The system repair discs (select models only) are used to start up (boot) the computer and repair the operating system in case of system instability or failure. Your initial and subsequent backups allow you to restore your data and settings if a failure occurs.
Using the Windows recovery tools To recover information you previously backed up: Select Start > All Programs > Maintenance > Backup and Restore. Follow the on-screen instructions to recover your system settings, your computer (select models only), or your files. To recover your information using Startup Repair, follow these steps: CAUTION: Using Startup Repair completely erases hard drive contents and reformats the hard...
If the HP Recovery partition is listed, restart the computer, and then press while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Press while the “Press <F11> for recovery” message is displayed on the screen. Follow the on-screen instructions.
Windows Vista To protect your information, use the Backup and Restore Center to back up individual files and folders, back up your entire hard drive (select models only), or create system restore points. In case of system failure, you can use the backup files to restore the contents of your computer. The Backup and Restore Center provides the following options: ●...
To create a backup using Backup and Restore Center: NOTE: Be sure that the computer is connected to AC power before you start the backup process. NOTE: The backup process may take over an hour, depending on file size and the speed of the computer.
Select Repair your computer. Follow the on-screen instructions. NOTE: For additional information on recovering information using the Windows tools, perform a search for these topics in Help and Support. Using f11 recovery tools CAUTION: Using completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on the computer are permanently removed.
Page 67
NOTE: This process takes several minutes. If possible, back up all personal files. Restart the computer, and then insert the Windows Vista operating system DVD into the optical drive before the Windows operating system loads. When prompted, press any keyboard key. Follow the on-screen instructions.
Contacting customer support If the information provided in this user guide, in the HP Notebook Reference Guide, or in Help and Support does not address your questions, you can contact HP Customer Support at: http://www.hp.com/go/contactHP NOTE: For worldwide support, click Contact HP worldwide on the left side of the page, or go to http://welcome.hp.com/country/us/en/wwcontact_us.html.
Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer: ● Serial number label—Provides important information, including the following: Component Product name Serial number (s/n) Part number/Product number (p/n) Warranty period Model description Have this information available when you contact technical support.
Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer.
Operating environment Factor Metric U.S. Temperature Operating (writing to optical disc) 5°C to 35°C 41°F to 95°F Nonoperating -20°C to 60°C -4°F to 140°F Relative humidity (noncondensing) Operating 10% to 90% 10% to 90% Nonoperating 5% to 95% 5% to 95% Maximum altitude (unpressurized) Operating -15 m to 3,048 m...