Configuring Quickview Personal Preferences - Dell PowerConnect W-Airwave User Manual

Configuring QuickView Personal Preferences

To configure your personal preferences in QuickView, expand the Display menu at the top of the screen and
select the Preferences icon in the Options section (illustrated in
Figure 6 The Preferences icon in the Options section of the Display menu
General - select from the Configure Preferences drop-down menu:

Enable auto-refresh toggle

Refresh Interval in minutes

Show Scale toggle

Show Scale

Hide neighbor lines ignored in location calculation

High Quality Background Image - you can disable to increase rendering speed

Label transparency slider

Figure 7 QuickView Preferences Page Illustration (General preferences selected)
APs - select from the Configure Preferences drop-down menu:

BW - select the kbps threshold for normal (green), high (yellow), and excessive (red)

# of Users - select the number of users threshold for normal (green), high (yellow), and excessive (red)

% of Uptime for the last 24 hours for normal (green) and excessive (red)

Radio Status - display red or green depending on the status of the radios within the AP.

AP Status - display red or green in relation to up/down status of AP.

Show Channel in Label toggle.

Icon Size - select the size of the AP icon display on the floor plan.

Show Channel in Label.

Show Transmit Power in Label.

Users - select from the Configure Preferences drop-down menu:

BW - select the kbps threshold for normal (green), high (yellow), and excessive (red)

Signal Strength - select the dBm client threshold for excellent (green), average (yellow), and poor (red).

Icon Size - select the size of the client device icon display on the floor plan.

Overlays - select type of overlay

Grid - non vector overlay

Dell PowerConnect W AirWave 7.2 | VisualRF User Guide
Figure 6) as follows:
Setting Up and Tuning VisualRF | 17