Dell Powerconnect W-ClearPass Hardware Appliances User Manual page 225

Figure 193:
TACACS+ Enforcement Profiles (Services Tab)
Table 119:
TACACS+ Enforcement Profile (Services tab)
Container Description
Privilege Enter a value, from 0 to 15.
Level
NOTE: Refer to your network device documentation for definitions of the different privilege levels.
Selected To add supported services, click Add.
Services
To remove a service, select it and click Remove.
Policy Manager supports ARAP,eTIPS:HTTP (Policy Manager administrative interface login), PIX
shell, Shell, PPP:IP, PPP:IPX, Wireless-WCS:HTTP, CiscoWLC:Common and PPP:LCP.
Service Once the services have been selected, you can select the attributes to send for those services. Some
Attributes services have pre-defined attributtes (which are automatically populated by Policy Manager in a drop
down list in the Name field). You can also add custom attributes in the Name field. Add service
attributes corresponding to the services selected in Selected Services.
Policy Manager ships configured with attributes for some of the listed services.
Selections in the Commands tab configure commands and arguments allowed/disallowed for the selected Service
Type.
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide 225