"make-subscriber" on page 321
l
"reset-database" on page 321
l
"set-cluster-passwd" on page 321
l
"set-local-passwd" on page 322
l
drop-subscriber
Removes specified subscriber node from the cluster.
Syntax
cluster drop-subscriber [-f] [-i <IP Address>] -s
Where:
Table 194:
Drop-Subscriber Commands
Flag/Parameter
-f
-i <IP Address>
-s
Example
[appadmin]#
cluster drop-subscriber -f -i 192.168.1.1 -s
list
Lists the cluster nodes.
Syntax
cluster list
Example
[appadmin]#
cluster list
cluster list
Publisher
:
Management port IP=192.168.5.227
Data port IP=None [local machine]
make-publisher
Makes this node a publisher.
Syntax
cluster make-publisher
Example
[appadmin]#
********************************************************
* WARNING: Executing this command will promote the
320
Description
Force drop, even for down nodes
Management IP address of the node. If not specified
and the current node is a subscriber, Policy Manager
drops the current node.
Do not reset the database on the dropped node.
By default, Policy Manager drops the current node (if a
subscriber) from the cluster.
cluster make-publisher
*
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide