Display-Panel Cable
Removing the Display-Panel Cable
1 Follow the procedures in "Before You Begin" on page 9.
2 Remove the display assembly (see "Removing the Display Assembly" on
page 47).
3 Remove the display bezel (see "Removing the Display Bezel" on page 51).
4 Remove the inverter board (see "Removing the Inverter Board" on
page 59).
5 Remove the display panel (see "Removing the Display Panel" on page 53).
6 Turn the display panel over and place it on a clean surface.
7 Pull the pull-tab as shown in the illustration to disconnect the display-
panel cable from the connector on the display panel.
1
1
display-panel cable
56
Display
2
display panel cable connector
2