Replacing The Processor Module - Dell Inspiron 1428 Service Manual

1 processor module
3 ZIF-socket cam screw
CAUTION:
heat transfer areas on the processor module thermal-cooling assembly. The oils in
your skin can reduce the heat transfer capability of the thermal pads.
CAUTION:
straight up. Be careful not to bend the pins on the processor module.
5 Lift the processor module from the ZIF socket.

Replacing the Processor Module

NOTE:
If a new processor module is installed, you will receive a new thermal-
cooling assembly, which will include an affixed thermal pad, or you will receive a
new thermal pad along with documentation to illustrate proper installation.
1 Follow the procedures in "Before You Begin" on page 9.
2 Align the pin-1 corner of the processor module with the pin-1 corner of the
ZIF socket, then place the processor module.
44
Processor Module
1
To ensure maximum cooling for the processor module, do not touch the
When removing the processor module, lift the processor module
2
2 ZIF socket
3