Removing The Power Button Board; Replacing The Power-Button Board - Dell Inspiron 13 N3010 Service Manual

Back to Contents Page
Power Button Board
Dell™ Inspiron™ N3010 Service Manual
Removing the Power Button Board
Replacing the Power Button Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Power Button Board
1. Follow the instructions in Before You
2. Remove the battery (see Removing the
3. Remove the memory-module cover (see
4. Remove the memory module(s) (see
5. Remove the keyboard (see
6. Remove the palm rest assembly (see
7. Turn the palm rest assembly over and remove the two screws that secure the power button board to the palm rest assembly.
1 power button board
8. Lift the power button board off the palm rest assembly.
Replacing the Power Button Board
1. Follow the instructions in Before You
2. Place the power button board on the palm rest assembly and replace the two screws that secure the power button board to the palm rest assembly.
3. Turn the palm rest assembly over.
4. Replace the palm rest assembly (see
Begin.
Battery).
Removing the Memory-Module
Removing the Memory Module(s)).
Removing the Keyboard).
Removing the Palm Rest
2 screws (2)
Begin.
Replacing the Palm Rest
Removing the
Cover).
Assembly).
Assembly).
Battery) before working inside the