Table of Contents
Advertisement
to confirm the switching to TV input terminal. After
switching, the signal source menu disappears, and at the
upper right corner of screen displays the information of
current signal source.
Pressing this key repeatedly can exit from the signal
source menu.
In case of no other operation, the signal source menu
will automatically disappear upon reaching the OSD
disappearance time preset in the main menu.
Source
TV
AV
Component
PC
HDMI
USB
:Move
Searching Channel
In this section, how to use the remote control to set
channel is explained. You can also use buttons on the TV
set to set channel.
Channel Edit
Note: Only available in the source of TV and Tuning lock
in the H.Lock menu is off.
A
Press
MENU on the remote control unit or MENU
on the TV's front panel to display main menu,
and then press
/
B
Press
/
to select the Channel Edit
:OK
OK
to select Tuning menu.
Basic Receiving and Playing Operations
option, and then press OK to enter submenu.
Channel Edit
Search
Fine Tune
Color system
Sound system
Skip
Search
to select the Search option, and
Press
/
finally press
/
to start manual search. Upon
finding a program, the search will automatically
stop, and the program will be stored onto the
current channel. You may stop the search by
pressing OK or MENU .
Fine Tune
Press
/
to select the Fine Tune option, and
then press
/
to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally,
the optimal picture effect can be obtained without
fine tuning when watching TV programs, and fine
tuning is to meet the need of adjusting a certain
program.
Color system
Press
/
to select the Color Systems option,
and then press
to select correct color
/
system.
The TV is designed with four systems for your
choice, i.e. Auto, PAL , SECAM, NTSC and NTSC443.
Generally, the system is set as Auto and it is not
necessary to make an adjustment. The system is
normally set as Auto during auto search.
Sound system
The TV is designed with four systems for your
choice, i.e. D/K, M, B/G and I. Generally, it is not
necessary to adjust the system. The system is
normally set as DK during auto search.
Skip
When the skip is set ON, the channel will be
skipped when pressing CH
be selected by pressing 0-9 numerical keys.
LCD television Owner's Manual
112.25MHz
112.25MHz
PAL
DK
OFF
Return
Move
OK
Menu
OK
or CH
and only can
13
Advertisement
Table of Contents
