Table of Contents
Advertisement
Basic Receiving and Playing Operations
Timer Functions
Setting of Current Time
The current time is calculated from the moment upon
turning the TV on. At first, check whether the time
indicated on the TV's clock is consistent with the standard
time of your time zone; if not, adjust the clock as follows:
A
Press
MENU on the remote control unit or MENU
on the TV's front panel to display the main menu,
and then press
/
afterwards press
/
option.
B
Press
/
to set hour and minute.
C
Press
/
to adjust the time.
D
After finishing time setting, press
Timer
Setting of ON/OFF Time
This function allows the TV to automatically turn on or
enter standby mode upon reaching the preset time.
A
Press
MENU on the remote control unit or MENU
on the TV's front panel to display the main menu,
and then press
/
afterwards press
/
Time option.
B
Press OK to enter the setting screen, and then press
/
to select ON or OFF, if you select ON, press
/
to set hour and minute. ON indicates the On/
Off Time function is enabled while OFF indicates the
function is disabled.
18 LCD television Owner's Manual
to select the Timer menu,
to select the Current Time
OK or MENU to confirm.
to select the Timer menu,
to select the On Time or Off
C
After finishing time setting, press
Note
After setting the On/Off Time function, if the TV
is AC off or forcible DC off, the function will be
automatically cleared.
Setting of On Channel
This function is used in combination with the On/Off Time
function. When the TV turns on upon reaching the On
time, it automatically enters the preset channel.
A
Press
MENU on the remote control unit or MENU
on the TV's front panel to display the main menu,
and then press
/
afterwards press
/
option.
B
Press
/
to set the On Channel or OFF.
Setting of Remind Time and Remind
Channel
The remind time and remind channel functions allow the
TV to automatically enter the preset channel at preset
time. If the TV is AC off or forcible DC off, the preset time
will be cleared.
OK or MENU to confirm.
to select the Timer menu,
to select the On Channel
Advertisement
Table of Contents
