Searching Channel; Channel Edit - Haier L26F6 Owner's Manual

to confirm the switching to TV input terminal. After
switching, the signal source menu disappears, and at the
upper right corner of screen displays the information of
current signal source.
Pressing this key repeatedly can exit from the signal
source menu.
In case of no other operation, the signal source menu
will automatically disappear upon reaching the OSD
disappearance time preset in the main menu.
Source
TV
AV1
AV2
S-Video
Component
PC
HDMI1
HDMI2
USB
:Move

Searching Channel

In this section, how to use the remote control to set
channel is explained. You can also use buttons on the TV
set to set channel.

Channel Edit

Note: Only available in the source of TV and Tuning lock
in the H.Lock menu is off.
A
MENU on the remote control unit or MENU
Press
on the TV's front panel to display main menu,
and then press 3 / 
6
5
B
Press / to select the Channel Edit
OK :OK
to select Tuning menu.
Basic Receiving and Playing Operations
option, and then press OK to enter submenu.
Channel Edit
Search
Fine Tune
Color system
Sound system
Skip
Search
6
5
to select the Search option, and
Press /
3 
finally press / to start manual search. Upon
finding a program, the search will automatically
stop, and the program will be stored onto the
current channel. You may stop the search by
pressing OK or MENU .
Fine Tune
6
5
Press / to select the Fine Tune option, and
3 
then press / to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally,
the optimal picture effect can be obtained without
fine tuning when watching TV programs, and fine
tuning is to meet the need of adjusting a certain
program.
Color system
6
5
Press / to select the Color Systems option,
and then press 3 
/
system.
The TV is designed with four systems for your
choice, i.e. Auto, PAL , SECAM, NTSC and NTSC443.
Generally, the system is set as Auto and it is not
necessary to make an adjustment. The system is
normally set as Auto during auto search.
Sound system
The TV is designed with four systems for your
choice, i.e. D/K, M, B/G and I. Generally, it is not
necessary to adjust the system. The system is
normally set as DK during auto search.
Skip
When the skip is set ON, the channel will be
skipped when pressing CH ∧ or CH ∨ and only can
be selected by pressing 0-9 numerical keys.
LCD television Owner's Manual
112.25MHz
112.25MHz
PAL
DK
OFF
Return Move OK
Menu OK
to select correct color
13