How To Customize Your Own Audio Status; Timer Functions; Setting Of Current Time - Haier L24K3 User Manual

Designed the sound to best suit music programs.
Theater
Enables extra bass and treble to enhance the movie
experience.
You can also press S.MODE button on the remote control
to select User / Standard / Music / Theater mode.
How to customize your own audio
status
A
Press MENU to display main menu on the screen,
and then press /
afterwards press /
adjusted.
B
Press / to adjust.
menu
Volume
Balance
Digital tone
SRS TS XT
AVL
MAXX Bass
Reset
Sound Tuning
Volume
Press / to adjust the volume of a TV program.
Balance
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
The intermediate value is 0. When indication value
of Balance increases toward 50, sound of the right
and left speakers becomes stronger and weaker,
respectively. When indication value of Balance
decreases toward -50, sound of the right and left
speakers becomes weaker and stronger.
Digital tone
This select the modes for sound reproduction dependent
on the broadcast signals or signals from external inputs
received.
Select the mode of sound (User/Standard/Music/Theater).
If the User mode is selected, press OK to enter the
digital tone menu,(as shown in the below figure),
and then press /
range of 50~15K from bass to treble, afterwards press
to select the Audio icon,
to enter the option to be
50
0
Standard
OK
Off
Off
Low
OK
to select a benchmark in the
Basic Receiving and Playing Operations
/ to adjust, if a different benchmark is selected
for adjustment, the original adjustment data will be
automatically cleared.
menu
Standard
+6db
Music
Theater
0
User
-6db
50 75
Sound Tuning
SRS TS XT
The surround sound feature expands the audio
listening field wider and deeper to create exceptional
sound quality from the TV's speakers.
AVL (Automatic Volume Limit)
This will reduces the differences in volume level
among broadcasters.
MAXX Bass
To adjust the super bass. Press
bass off, low or high Medium.
Reset
Return to factory default settings.

Timer Functions

Setting of Current Time

The current time is calculated from the moment upon
turning the TV on. At first, check whether the time
indicated on the TV s clock is consistent with the standard
time of your time zone; if not, adjust the clock as follows:
A
Press MENU on the remote control unit or MENU
on the TV's front panel to display the main menu,
and then press /
afterwards press /
option.
B
Press / to set hour and minute.
C
Press / to adjust the time.
D
After finishing time setting, press
TFT -LCD television Owner's Manual
Digital tone
100 300 1K 3K 5K 10K 15K
/ to select super
to select the Timer menu,
to select the Current Time
OK or MENU to confirm.
18