Automatic Search - Haier L24K3 User Manual

Basic Receiving and Playing Operations
Search
to select the Search option, and finally
Press /
press / to start manual search. Upon finding a
program, the search will automatically stop, and the
program will be stored onto the current channel.
You may stop the search by pressing OK or MENU .
Fine Tune
Press / to select the Fine Tune option, and
then press / to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally, the
optimal picture effect can be obtained without fine
tuning when watching TV programs, and fine tuning
is to meet the need of adjusting a certain program.
Color system
Press / to select the Color Systems option,
and then press
/
system.
The TV is designed with three systems for your
choice, i.e. Auto, PAL , SECAM and NTSC. Generally,
the system is set as Auto and it is not necessary to
make an adjustment. The system is normally set as
Auto during auto search.
Sound system
The TV is designed with four systems for your
choice, i.e. D/K, M, B/G and I. Generally, it is not
necessary to adjust the system. The system is
normally set as DK during auto search.
Skip
When the skip is set ON, the channel will be
skipped when pressing CH
be selected by pressing 0-9 numerical keys.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press to set Skip as Off.
/

Automatic search

A
Press MENU on the remote control to display main
menu, and then press
menu. (Note: Only when Tuning Lock in the H. Lock
menu is Off can the Channel menu be selected.)
15 TFT -LCD television Owner's Manual
to select correct color
or CH and only can
/ to select Tuning
menu
Channel Edit
Auto Search
Prog. Exchange
Sound Tuning
B
press / to select the Auto Search option, press
OK to enter the auto search menu, afterwards press
to select the Confirm option, and finally press
/
OK to confirm the starting of auto search.
menu
Sound Tuning
C
During auto search, the scale value on the progress
bar is continually increasing, indicating the auto
search is in progress. After finishing the auto search,
the TV will play the channel starting the auto search.
To stop the search in halfway, just press MENU/OK,
and the TV will play the first searched channel.
menu
Auto Search
Auto Searching
Found Channel(s):2
Frequency:25NHz
Cancel
Sound Tuning
Exchange
A
Press MENU on the remote control unit or MENU on
the TV's front panel to display main menu, and then
press / to select Tuning menu.
B
Press / to select the Prog. Exchange option,
and then press OK to enter its submenu.
C
Press / to select the To Channel option, and
40%