Exchange; Watching Tv Program; How To Select The Desired Program; How To Select The Desired Sound - Haier L24K3 User Manual

then press / to set the found to be exchanged to.
menu
Prog. Exchange
Current Channel
To Channe

Exchange

Sound Tuning
D
After adjusting the current channel and the found to
be exchanged to, press
to the Exchange option, and then press OK to start
exchange and exchange the program on current
channel to the channel you set for exchange.

Watching TV Program

You can watch TV program in a presetting channel.

How to select the desired program

A
Using Program number buttons
Directly enter the channel number with the numeric
keypad on the remote control. If to select channel
numbers of double-digital or three-figure, press
continuously the numeric buttons in three second.
B
Using CH /CH buttons
Press CH+ to select a channel number in number
increasing direction. Press CH
number in number decreasing direction.

How to select the desired sound

Press VOL-/+ buttons on the remote or the front of
the TV set to adjust the volume level. The range is
0~100. When the volume buttons are pressed the
volume level is displayed automatically on the TV
screen.

Mute Setting

A
Press MUTE button on the remote control and a icon
will display on the screen. At this time, the sound of
the TV set is turned off.
10
20
OK
/ to move the cursor
to select a channel
Basic Receiving and Playing Operations
B
If you want to recover the sound, press
button again or directly press VOL+ button.

Quick program view

A
Suppose that you previously watched a TV program
on Channel 8, but now you are watching a TV
program on Channel 18 (as shown in the below
figure).
B
If you want to return to Channel 8, just press
"RECALL (Flashback)" once.
C
If you want to return to Channel 18 again, just press
"RECALL (Flashback)" once again.
Note
This function is only available in TV mode.

Picture Control Functions

This means the adjustment of specific contents in the
picture, if already in normal condition, it is not necessary
to make any adjustment.
Due to different TV signal inputs, some items may need
to be adjusted. The following makes a description by
only taking TV signal as an example.
How to select the picture mode
A
Press MENU to display main menu on the screen, and
then press / to select the Picture menu, afterwards
press / to enter the option to be adjusted.
B
Press / to move the cursor to the option to be
adjusted, and then press
Vivid/Soft/User.
You can also press P.MODE on the remote control to
TFT -LCD television Owner's Manual
MUTE
/ to select Standard/
16