Solving Copying Problems; Product Makes Noise, But Nothing Copies - Epson WorkForce WF-3530 Manual

2. Press the left or right arrow button, select Wi-Fi Setup, then press OK.
3. Select Wi-Fi/Network Status.
4. Press one of the
(Press the
Examine the settings shown on the network status sheet to diagnose any problems you have.
Parent topic:

Solving Copying Problems

Check these solutions if you have problems copying with your product.

Product Makes Noise, But Nothing Copies

Product Makes Noise When It Sits for a While
Parent topic:
Product Makes Noise, But Nothing Copies
If your product makes a noise, but nothing copies, try these solutions:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• If the nozzle check page does not print, but the product's power is on, make sure your product
software is installed correctly.
buttons to print the network status sheet.
Stop/Reset button if you want to cancel the operation.)
Solving Network Problems
Solving Problems
269