Print Head Alignment; Aligning The Print Head Using The Product Touch Panel - Epson WorkForce WF-3530 Manual

Print head needs cleaning
• If there are no gaps, click Finish.
• If there are gaps or the pattern is faint, click Clean to clean the print head again.
If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours. Then
try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or
damaged and needs to be replaced.
Parent topic:
Related topics
Replacing Ink Cartridges and Maintenance Boxes

Print Head Alignment

If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Note: Banding may also occur if your print head nozzles need cleaning.

Aligning the Print Head Using the Product Touch Panel

Aligning the Print Head Using a Computer Utility
Parent topic:
Aligning the Print Head Using the Product Touch Panel
You can align the print head using the touch panel on your product.
Print Head Cleaning
Adjusting Print Quality
250