14. Remove the five screws that secure the optical-drive bracket to the optical drive.
1
screws (5)
2
15. Remove the optical-drive bracket from the optical drive.
16. Remove the interposer from the optical drive.
1
interposer
Replacing the Optical Drive
1. Follow the instructions in
Before You
2. Connect the interposer to the optical drive.
3. Align the screw holes on the optical-drive bracket with the screw holes on the optical drive and replace the five screws that secure the optical-drive
bracket to the optical drive.
4. Align the slot on the optical-drive bracket with the alignment posts on computer base and place the optical-drive assembly in the computer.
5. Replace the three screws that secure the optical-drive assembly to the computer base.
6. Adhere the optical-drive cable to the computer base, slide the cable into the connector on the system board, and press down on the connector latch to