13
Displaying RSTP information
TABLE 80
This field...
forceVersion
MigrateTime
txHoldCount
Port
Role
State
392
The show rstp detail command output (Continued)
Displays...
the configured version of the bridge:
•
0 – The bridge has been forced to operate in an STP compatible mode.
•
2 – The bridge has been forced to operate in an RSTP mode.
The number of seconds the bridge took to migrate from STP to RSTP mode.
The number of BPDUs that can be transmitted per Hello Interval. The default
is 3.
ID of the port in slot#/port# format.
The current role of the port:
•
Root
•
Designated
•
Alternate
•
Backup
•
Disabled
Refer to
roles.
The port's current RSTP state. A port can have one of the following states:
•
Forwarding
•
Discarding
•
Learning
•
Disabled
Refer to
states"
"Bridges and bridge port roles"
"Bridge port states"
on page 357 and
on page 358.
on page 353 for definitions of the
"Edge port and non-edge port
BigIron RX Series Configuration Guide
53-1001986-01